GE JCT 915 Safety, Tones at the End of a Timed Cycle, Tone Volume, Using Auto Recipe Conversion

Page 7

www.geappliances.ca

Tones at the End of a Timed Cycle

Safety

At the end of a timed cycle, 3 short beeps will sound followed by one beep every 6 seconds until the CLEAR/OFF pad is pressed. This continuous 6-second beep may be canceled.

To cancel the 6-second beep:

Press the BAKE and BROIL HI/LO pads at the same time for 3 seconds, until the display shows SF.

Press the KITCHEN TIMER ON/OFF pad. The display shows CON BEEP (continuous beep). Press the KITCHEN TIMER ON/OFF pad again. The display shows BEEP. (This cancels the one beep every 6 seconds.)

Press the START pad.

Instructions Operating

Tone Volume

This feature allows you to adjust the tone volumes to a more acceptable volume. There are three possible volume levels.

Press the BAKE and BROIL HI/LO pads at the same time for 3 seconds, until the display shows SF.

Press the OVEN LIGHT ON/OFF pad. The display will show 2 BEEP. This is the middle volume level.

Press the OVEN LIGHT ON/OFF pad again. The display will show 3 BEEP. This is the loudest volume level.

Press the OVEN LIGHT ON/OFF pad again. The display will show 1 BEEP. This is the quietest volume level.

For each time the level is changed, a tone will sound to provide an indication of the volume level.

Choose the desired sound level (1 BEEP, 2 BEEP or 3 BEEP).

Press the START pad to activate the level shown.

Instructions Care and Cleaning

Using Auto RecipeConversion

When using convection bake, the Auto RecipeConversion feature will automatically convert entered regular baking temperatures to convection baking temperatures.

Once the feature is activated, the display will show the actual converted (reduced) temperature. For example, if you enter a regular recipe temperature of 350°F and press the START pad, the display will show CON

and the converted temperature of 325°F.

NOTE: This feature does not convert convection bake cooking times, only temperatures.

Press the BAKE and BROIL HI/LO pads at the same time for 3 seconds, until the display shows SF.

Press the CONVECTION BAKE pad. The display will show CON OFF. Press the CONVECTION BAKE pad again. The display will show CON ON.

Press the START pad.

To deactivate the feature, repeat steps 1–3 above but press the START pad when CON OFF is in the display.

Troubleshooting Tips Consumer Support

7

Image 7
Contents Write the model and serial numbers here Model # Serial # 350A4502P236 229C4020P316 29-503107-02 JROperating Instructions Safety Instructions Important Safety NoticeSafety Instructions Cleaning Operating Instructions Safety InstructionsCare and Cleaning Troubleshooting Tips Consumer Support Using the oven controlsSafety Instructions Operating Instructions Fahrenheit or Celsius Temperature Selection Special features of your oven controlSafety Instructions Tips Care and CleaningConverted temperature of 325F SafetyTone Volume Using Auto Recipe ConversionHow to Exit the Sabbath Feature Using the Sabbath FeatureHow to Set for Regular Baking/Roasting Troubleshooting Tips Care and CleaningCare and Cleaning Using the ovenBroiling Guide Instructions SafetyHow to Set the Oven for Broiling InstructionsCleaning Using the clock, timer and control lockoutOperating Instructions Care How to Set an Immediate Start and Automatic Stop Using the timed baking and roasting featuresCleaning Operating Instructions Support Troubleshooting Tips CareTroubleshooting Tips Consumer Support Using the probeHow to Set the Oven For Roasting When Using the Probe Adapting Recipes… Using the convection ovenConvection Fan Multi-Rack Convection BakingConvection Roast How to Set the Oven for Convection Baking or RoastingInstructions Operating Instructions Tips Consumer SupportCare and Cleaning Operating Instructions Using the timed features for convection cookingInstructions Operating Instructions Care and Cleaning Press the Convection Roast pad Convection Roasting GuideInstructions Operating Instructions Care Using the proofing and warming featuresHow to Set the Oven For Proofing How to Set the Oven For WarmingType of margarine will affect baking performance Adjust the oven thermostat-Do it yourselfCleaning Operating Instructions To Adjust the ThermostatOven must be cool in order to set the self-clean cycle Using the self-cleaning ovenBefore a Clean Cycle How to Set the Oven for CleaningAfter a Clean Cycle Cleaning Operating Instructions SafetyHow to Delay the Start of Cleaning To remove Care and cleaning of the ovenHow to Remove Packaging Tape Oven Light BulbsLift-Off Oven Door Operating Instructions SafetyTroubleshooting Tips Care and Cleaning Cleaning the Oven DoorOven Heating Elements Care and CleaningProbe Oven Racks and Convection Roasting RackStainless Steel Surfaces on some models Control PanelProblem Possible Causes What To Do Before You Call For Service…When you want See the Using the self-cleaning oven sectionDuring clean cycle Not open after a Clean cycleOr letter flash See the Special features of your oven control sectionPower outage A numberTroubleshooting Tips One Year Camco Built-In Electric Oven WarrantyWhat is Not Covered We Will ReplaceContact Us Consumer Support GE Appliances Website Schedule ServiceParts and Accessories Extended Warranties

JCT 915, JCK 915 specifications

The GE JCK 915 and JCT 915 are advanced electric locomotives that exemplify modern engineering and operational efficiency. These models are specifically designed to meet the demands of contemporary rail transport, offering reliability, performance, and reduced environmental impact.

One of the main features of the JCK 915 and JCT 915 locomotives is their powerful traction system. These models are equipped with high-efficiency traction motors that provide excellent acceleration and speed capabilities. This is particularly beneficial for freight services where the movement of heavy loads over long distances is required. The locomotives can operate effectively on various rail gauges, making them versatile for different rail networks.

The locomotives utilize cutting-edge technologies, including advanced diagnostic systems. These systems monitor the health and performance of critical components in real-time, allowing for proactive maintenance and reducing downtime. The integration of onboard data analytics ensures that operators can make informed decisions based on performance metrics, leading to increased efficiency and longevity of the locomotive.

The aerodynamic design of the JCK 915 and JCT 915 also contributes to their operational efficiency. With reduced drag coefficients, these locomotives can achieve higher speeds while consuming less energy. This design consideration aligns with the industry's growing emphasis on sustainability and lowering greenhouse gas emissions.

Safety is a top priority in the design of these locomotives. They come equipped with modern safety features, including advanced braking systems and collision avoidance technologies. The cab design provides improved visibility for the operators, enhancing overall safety during operations.

In terms of comfort, the cab area of the JCK 915 and JCT 915 is designed with the operator in mind. Ergonomic seating, modern controls, and climate control systems create a comfortable working environment, which can significantly enhance operational efficiency.

Moreover, both models are equipped with regenerative braking capabilities. This feature allows the locomotives to recover energy during braking, which can be reintegrated into the system, improving overall energy efficiency.

In summary, the GE JCK 915 and JCT 915 locomotives showcase a blend of power, efficiency, modern safety, and operator comfort. With their advanced features and technologies, they are well-suited to meet the evolving challenges of the rail industry, paving the way for a more efficient and sustainable future in transportation.