Using the clock and timer. | www.GEAppliances.ca |
Not all features are on all models.
Safety
Make sure the clock is set to the correct time of day.
To Set the Clock
The clock must be set to the correct time of day for the automatic oven timing functions to work properly. The time of day cannot be changed during a delayed cooking or a delayed
Touch the CLOCK pad twice.
Touch the + or – pads.
If the + or – pads are not touched within one minute after you touch the CLOCK pad, the display reverts to the original
setting. If this happens, touch the CLOCK pad twice and reenter the time of day.
Touch the START/ON pad until the time of day shows in the display. This enters the time and starts the clock.
To check the time of day when the display is showing other information, simply touch the CLOCK pad. The time of day shows until another pad is touched.
Instructions Operating Instructions
To Turn Off the Clock Display
If you have several clocks in your kitchen, you may wish to turn off the time of day clock display on your range.
Touch the CLOCK pad once to turn off the time of day display. Although you will not be able to see it, the
clock maintains the correct time of day.
Touch the CLOCK pad twice to recall the clock display.
Care and
The OFF pad does not affect the timer.
To Set the Timer
The timer does not control oven operations. The maximum setting on the timer is 9 hours and 59 minutes.
Touch the TIMER pad.
Touch the + or – pads until the amount of time you want shows in the display. The maximum time that can be entered in minutes is 59. Times more than 59 minutes should be changed to hours and minutes.
If you make a mistake, touch the TIMER pad and begin again.
Touch the START/ON pad. The time will start counting down, although the display does not change until one minute has passed.
When the timer reaches :00, the control will beep 3 times followed by one beep every 6 seconds until the TIMER pad is touched.
Cleaning Troubleshooting
To Reset the Timer
If the display is still showing the time remaining, you may change it by touching the TIMER pad, then touching the + or – pads until the time you want appears in the display.
If the remaining time is not in the display (clock, delay start set time or cooking time are in the display), recall the remaining time by touching the TIMER pad and then touching the + or – pads to enter the new time you want.
Tips Consumer
To Cancel the Timer
Touch the TIMER pad twice.
15