Using the surface units.
Be sure you turn the control knob to OFF when you finish cooking.
How to Set
Push the knob in and turn in either direction to the setting you want.
At both OFF and MAX the control clicks into position. You may hear slight clicking sounds during cooking, indicating the control is keeping the power level you set.
A HOT surface indicator light, on
the cooktop, will glow when any radiant element is turned on. It will remain on until the surface is cooled to approximately 65.5°C (150°F).
Hot surface indicator light will:
■come on when the unit is hot to the touch.
■stay on even after the unit is turned off.
■glow until the unit is cooled to approximately 65.5°C (150°F).
WARNING: The surface units are automatically disabled during the
Dual Surface Unit Control Knob (on some models)
Tips Care and Cleaning Operating Instructions Safety Instructions
The right front surface unit has 2 cooking sizes (15.2 cm [6″] and 22.9 cm [9″] or 22.9 cm [9″] and
30.5cm [12″] depending on model) to select from so you can match the size of the unit to the size of the cookware you are using.
On some models, the left front surface unit
also has 2 cooking sizes (12.7 cm [5″] and 20.3 cm [8″] or 15.2 cm [6″] and 22.9 cm [9″] depending on model).
To use the small surface unit, turn the control knob counterclockwise to the SMALL BURNER settings.
To use the large surface unit, turn the control knob clockwise to the LARGE BURNER settings.
|
| 30.5 cm (12") |
|
| or |
|
| 22.9 cm (9") |
|
| 22.9 cm (9") |
22.9 cm (9") | 15.2 cm (6") | or |
or | 15.2 cm (6") | |
or | 12.7 cm (5") |
|
20.3 cm (8") |
|
|
Consumer Support Troubleshooting
Using the Bridge Burner (on some models)
To use the bridge burner, turn the
left front control knob clockwise to the BRIDGE BURNER settings.
For full bridge surface unit operation, also turn on the left rear surface unit.
To use only the front surface unit, turn the control knob counterclockwise to the FRONT BURNER settings.
8