b2
PRESSURE REGULATOR INSTALLATION
STEP 1
Mount the 1/2” NPT (conical) male connector to the pressure regulator and tighten by using a wrench.
Do not over tighten the connector. Over tightening may crack regulator.
LOCK
Arrow
Fig. 2.2a
14
STEP 2
Assemble the 1/2” NPT connector + pressure regulator group to the extension pipe interposing the gasket supplied. The regulator cover must be ordiented toward the front side of the range.
IMPORTANT: use two spanners to tighten the connection.
Regulator cover