Thermador VCIN36JP, VCIN48JP, VCIB48JP, VCIB54JP, VCIB36JP Care and Cleaning, To Clean Hood Surface

Page 11

Care and Cleaning

WARNING:

Be sure the entire appliance (including the grease filters and light bulbs) has cooled and grease has solidified before attempting to clean any part of the appliance.

To Clean Hood Surface

•For general care, wipe the outside of the stainless steel with sudsy water or household cleaners such as Fantastik® or Formula 409® cleaners, rinse well and dry with a clean soft cloth to avoid water marks.

•Wipe and dry stainless steel in the same direction as the grain. Avoid using too much pressure, which may mar the surface.

•Do not use abrasive products such as steel wool.

•To remove finger prints and give added shine, use a stainless steel cleaner such as Stainless Steel Magic®, Hadco® stainless steel polish, Sprayway® stainless steel polish and cleaner, or 3M stainless steel cleaner and polish.

•Do not allow any cleaning compounds to remain in contact with stainless steel for extended periods.

NOTICE:

The use of brand names is intended only to indicate a type of cleaner. This does not constitute an endorsement. The omission of any brand name cleaner does not imply its adequacy or inadequacy. Many products are regional in distribution and can be found in the local markets. It is imperative that all products be used in strict accordance with instructions on the package.

To Clean Filters, Filter Spacers, and Grease Trays

Your hood has removable stainless steel filters, stainless steel filter spacers, and stainless steel grease trays. They must be cleaned when the filter light illuminates on the control panel or whenever they collect grease. When used over a grill, wok or other high grease applications, more frequent cleaning may be required.

To Remove Filters, Filter Spacers, and Grease Trays:

•Turn the fan and lights off. Be sure filters are cool and grease has congealed before removal.

•Remove in the following order:

1.Filters — start with center filters, push up, then pull out from the bottom. Depending upon the size and model of hood, there will be 2, 3, or 4 filters per hood.

2.Filter Spacers — push up, then pull out from the bottom.

3.Grease Trays — lift up and out. The grease trays must be in place before installing the filters. Depending upon the size and model of hood, there will be from 2 or 3 grease trays per hood.

•Reverse the above directions to reinsert the grease trays, filter spacers, and filters.

•The rating label and serial number labels are on the hood filter spacers and are visible after the filters have been removed (Figure 6 on page 8).

•The filters, filter spacers, and grease trays can be washed by hand or in the dishwasher. The front and sides of the appliance may be washed with warm soapy water and polished with stainless steel cleaner.

2

2

1

1

Filter

Spacers

Filter

Spacers

Filters

Grease Tray

Figure 4: The hood and parts

NOTICE:

Do not use cooktop, rangetop, or range while hood is disassembled.

English 6

Page 10 Page 12
Image 11
Page 10 Page 12
Contents USE and Care Guide Page Page Page Table of Contents Amps IntroductionBefore you Begin SafetyImportant Safety Instructions Hood Control Buttons OperationOperating the Hood High Temperature Fault Condition Over-temperature ConditionTo Remove Filters, Filter Spacers, and Grease Trays Care and CleaningTo Clean Hood Surface To Clean Filters, Filter Spacers, and Grease TraysLights MaintenanceHalogen Light Replacement Problem Suggested Solution ServiceBefore Calling Service How to Obtain Service or PartsRepair/Replace as Your Exclusive Remedy What this Warranty Covers & Who it Applies toHow to Obtain Service How Long the Warranty LastsProduct Registration Out of Warranty ProductWarranty Exclusions Nous attendons de vos nouvelles Fonctionnement de la hotte Boutons de commande de la hotteAvant dappeler pour du service Table des matièresThermador Avant de commencer Consignes de sécuritéConsignes de sécurité importantes Fonctionnement de la hotte Tableau de commande de la hotte encastrée sur mesurePanneau de télécommande optionnel FonctionnementSituation de surchauffe Delay Arrêt à retardementRappel de nettoyage des filtres Lumières LightsNettoyage de la surface de la hotte Entretien et nettoyageLumières EntretienProblème Solution suggérée Avant dappeler pour du serviceComment obtenir du service ou des pièces Plaque signalétique du produitÉnoncé de Garantie Limitée du Produit Enregistrement du produit Antes de llamar a atención al cliente Índice de materiasLuces Introducción Antes de comenzar SeguridadPrecaución Tablero de mando a distancia opcional FuncionamientoFuncionamiento de la campana Perillas de control de la campana empotrada a medidaCondición de sobrecalentamiento DelayAviso de limpieza de los filtros Luces LightsPara quitar los filtros y la bandeja para la grasa Cuidado y limpiezaLimpieza de la superficie de la campana Luces MantenimientoPlaca técnica del producto Problema Solución recomendadaServicio Antes de llamar a atención al clienteReparación / reemplazo como único recurso Cobertura de esta garantía y a quiénes se aplicaCómo obtener servicio Duración de la garantíaRegistración del producto Producto fuera de garantíaExclusiones de la garantía Entretien ServiceParts & Accessories Pièces et Accessoires

VCIN36JP, VCIN54JP, VCIB36JP, VCIB54JP, VCIB48JP specifications

The Thermador VCIN48JP, VCIB48JP, VCIB54JP, VCIB36JP, and VCIN54JP are the epitome of luxury and innovation in the realm of kitchen ventilation and cooking appliances. These high-performance ventilation hoods reflect Thermador’s commitment to quality, performance, and cutting-edge technology, making them a perfect choice for both professional chefs and home cooking enthusiasts.

One of the standout features of these models is the powerful internal blower system. The VCIN series, including the VCIN48JP and VCIN54JP, offers an impressive ventilation performance of up to 600 CFM, efficiently removing smoke, steam, and odors from your kitchen. The VCIB models, with their integrated bridge design, deliver exceptional performance while maintaining a sleek aesthetic. The adjustable blower settings allow users to tailor the ventilation power to meet their cooking needs.

In addition to their powerful performance, these ventilation hoods are equipped with advanced noise reduction technology. This feature ensures a quieter cooking environment, providing a more pleasant culinary experience without the distraction of excessive noise. The whisper-quiet operation is a significant advantage, especially during large family gatherings or when entertaining guests.

The VCIN and VCIB models also boast seamless integration with Thermador’s professional line of cooking appliances. With precise controls and easy installation, these hoods fit perfectly above Thermador ranges and cooktops, creating a cohesive look in any kitchen.

Moreover, the design of these hoods highlights their premium craftsmanship. Featuring high-quality stainless steel construction and elegant lines, they enhance the visual appeal of any kitchen setting, making a bold statement while ensuring durability and longevity.

Another noteworthy characteristic is the efficient LED lighting, which illuminates the cooking surface beneath. This feature not only enhances visibility but also contributes to energy savings, as LED lights consume less energy compared to traditional lighting options.

The easy-to-clean filters are another highlight of the VCIN and VCIB series. The stainless steel baffle filters are dishwasher safe, making maintenance simple and convenient. This focus on practicality comes alongside the commitment to style and performance, reflecting Thermador's dedication to creating high-end kitchen solutions.

In summary, Thermador's VCIN48JP, VCIB48JP, VCIB54JP, VCIB36JP, and VCIN54JP offer a stunning blend of power, aesthetics, and advanced technology. They are ideal for any gourmet kitchen, ensuring exceptional performance while adding elegance and sophistication to the heart of the home.
Top Page Image Contents