GE ZICP720 Frameless Cabinets The case trim, Overlaps cabinets at the top and sides

Page 4

Refrigerator

				Frameless Cabinets: The case trim
				overlaps cabinets at the top and sides.
				Therefore, frameless cabinets may require
				filler strips to prevent interference with
23-7/8" From				cabinet door swing. The opening must
	Rear of			allow for filler strips.
Refrigerator				allow for filler strips.
Case			1"	2"	3"
Case			3/4"	1-3/4"	2-3/4"
Trim			3/4"	1-3/4"	2-3/4"
			1/2"	1-1/2"	2-1/2"
			1/2"	1-1/2"	2-1/2"
		1/4"		1-1/4"	2-1/4"

1/4"

1/2"

3/4"

3/4" Overlay

Panel

(Nominal Size)

Door

1/4"

1/2"

3/4"

1-1/4"

Image 4

Contents Installation Instructions Contents Before YOU BeginInstallation Space Dimensions and Clearances Frameless Cabinets The case trim Overlaps cabinets at the top and sidesFiller strips to prevent interference with Cabinet door swing. The opening mustDoor Swing optional setting Scale Tools Required Hardware SuppliedTrim Supplied Materials RequiredRemove Packaging Install Water LinesShut off the main water supply Install Side Panels Install NEW Side TrimSkip this step if you are not using side panels Install ANTI-TIP Brackets Brackets Required BlockReceptacles. Reach into the top opening Push Refrigerator Into OpeningLevel the Refrigerators BracketPlace a level inside the machine for each unit Drawers should be evenly alignedAlternate ANTI-TIP Procedure Install Grille PanelTWO People are Required to Install Grille Panel Secure Refrigerator to CabinetryInstall Center Trim Strip Adjust Door SwingClose the grille panel and both doors Check and Correct Door AlignmentSkip this Step if Doors are Level RH Door Install Dim. a LH Spacer RH Spacer LH Door Install Dim. a LH Spacer RH SpacerDetermine Correct Spacer RH Fresh Food door is higher than the LH doorRemove Pin Screws Install Grille Base Wrap Connect Water SupplyCopper Tubing GE SmartConnect TubingInstall Toekick Connect PowerStart Icemaker Page GE Consumer & Industrial

Frameless Cabinets: The case trim