Installation Instructions
3 INSTALL NEW SIDE TRIM
CAUTION: Handle parts with care to avoid scratching.
PRUDENCE : Manipulez les pièces soigneusement pour éviter de les rayer.
Foam Spacer
Pads
A. Install inside case trims (B & C) with notches toward the bottom. Install screws (I) through 5 slots on each trim.
B. Apply the supplied foam spacer pads (H) to the mating side of one product as shown.
4 INSTALL SIDE PANELS
Side panels must be used whenever the sides of the refrigerator will be exposed. The 1/4″ side panels will slip into the side case trim. Secure the panels to the refrigerator with
•Cut a notch in the top front corner as shown to allow clearance for corner keys in the front side trim.
Skip this step if you are not using side panels.
* Depending on |
| |
24″ | ||
installation height. | ||
|
3/16″
*84″
*3″ to 4″
8