Installation Instructions
6POSITION REFRIGERATOR AND INSTALL TOP TRIM
•Before pushing the refrigerators into the Approx. 8″ opening, plug the power cords into the
receptacles. Reach into the top opening |
|
|
|
| |||||||||
|
| Soffit | |||||||||||
to grasp the power cord. Pull the power |
|
|
|
|
|
|
| ||||||
|
|
|
|
| |||||||||
cord into the opening as you push the |
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
| |||
refrigerator back. |
|
|
|
|
|
|
|
|
| ||||
• With hands against front corners, |
|
|
|
|
|
|
|
|
| ||||
push one refrigerator |
|
|
|
|
|
|
|
|
| ||||
the opening. The refrigerator should |
|
|
|
|
|
|
|
|
| ||||
|
|
|
|
|
|
| |||||||
be approximately 8″ forward of the |
|
|
|
|
| ||||||||
back wall. |
|
|
|
|
| ||||||||
•Gently push the second refrigerator
next to the other. The doors should be flush to each
other and the inside trims together.
•Install corner bracket (M) into each side of the top trim (A).
•Place the top trim across the top of the refrigerators and slip the corner brackets into the outside case trims.
Corner Trim
Bracket
•Install 8 screws (I) through the top of the trim and into the top case.
•Check to be sure the inside trims are aligned top and bottom. There should be a slight gap between the case trims.
•Install the flat metal bracket (K) between the two machine compartments. Slip the bracket under the
inside trim. Secure the bracket using the larger screws (L), one on each side. Leave a 3/8″ gap between the screw head and the top surface of the bracket.
Drive screws
leaving a 3/8″ gap
Slide bracket |
beneath trim |
PUSH REFRIGERATOR INTO OPENING
NOTE: 2 PEOPLE ARE REQUIRED TO PUSH THE UNIFIED REFRIGERATORS INTO THE OPENING.
•With hands against the front corners, gently push the unified refrigerators into the opening or against the back wall.
10