GE ZICP720 Check and Correct Door Alignment, Close the grille panel and both doors

Page 14

Installation Instructions

13CHECK AND CORRECT DOOR ALIGNMENT

•Close the grille panel and both doors.

•Check that the freezer drawers and bottom of doors are horizontal and even at the lower inside corners.

• Carefully measure the inside corners to determine if an adjustment is needed. A difference of 1/32″ is acceptable and does not require adjustment.

Spacer

Location

SKIP THIS STEP IF DOORS ARE LEVEL.

IMPORTANT: If the doors are not evenly aligned, they must be removed and spacers must be installed to raise or lower both doors.

Spacer

Location

14

Image 14

Contents Installation Instructions Contents Before YOU BeginInstallation Space Dimensions and Clearances Filler strips to prevent interference with Frameless Cabinets The case trimOverlaps cabinets at the top and sides Cabinet door swing. The opening mustDoor Swing optional setting Scale Trim Supplied Tools RequiredHardware Supplied Materials RequiredShut off the main water supply Install Water LinesRemove Packaging Skip this step if you are not using side panels Install NEW Side TrimInstall Side Panels Install ANTI-TIP Brackets Brackets Required BlockReceptacles. Reach into the top opening Push Refrigerator Into OpeningPlace a level inside the machine for each unit Level the RefrigeratorsBracket Drawers should be evenly alignedTWO People are Required to Install Grille Panel Alternate ANTI-TIP ProcedureInstall Grille Panel Secure Refrigerator to CabinetryInstall Center Trim Strip Adjust Door SwingSkip this Step if Doors are Level Check and Correct Door AlignmentClose the grille panel and both doors Determine Correct Spacer RH Door Install Dim. a LH Spacer RH SpacerLH Door Install Dim. a LH Spacer RH Spacer RH Fresh Food door is higher than the LH doorRemove Pin Screws Copper Tubing Install Grille Base WrapConnect Water Supply GE SmartConnect TubingStart Icemaker Connect PowerInstall Toekick Page GE Consumer & Industrial