GE TCX22 owner manual OperatingInstructions, TroubleshootingTips, CustomerService

Page 4

Safety Instructions

IMPORTANT SAFETY INFORMATION.

READ ALL INSTRUCTIONS BEFORE USING.

WARNING!

HOW TO CONNECT ELECTRICITY

Do not, under any circumstances, cut or remove the third (ground) prong from the power cord. For personal safety, this appliance must be properly grounded.

OperatingInstructions

The power cord of this appliance is equipped with a 3-prong (grounding) plug which mates with a standard 3-prong (grounding) wall outlet to minimize the possibility of electric shock hazard from this appliance.

Have the wall outlet and circuit checked by a qualified electrician to make sure the outlet is properly grounded.

Where a standard 2-prong wall outlet is encountered, it is your personal responsibility and obligation to have it replaced with a properly grounded 3-prong wall outlet.

The refrigerator should always be plugged into its own individual electrical outlet which has a voltage rating that matches the rating plate.

This provides the best performance and also prevents overloading house wiring circuits which could cause a fire hazard from overheated wires.

Never unplug your refrigerator by pulling on the power cord. Always grip plug firmly and pull straight out from the outlet.

Repair or replace immediately all power cords that have become frayed or otherwise damaged. Do not use a cord that shows cracks or abrasion damage along its length or at either end.

When moving the refrigerator away from the wall, be careful not to roll over or damage the power cord.

InstallationInstructions

USE OF ADAPTER PLUGS (Adapter plugs not permitted in Canada)

Because of potential safety hazards under certain conditions, we strongly recommend against the use of an adapter plug.

TroubleshootingTips

However, if you must use an adapter, where local codes permit, a temporary connection may be made to a properly grounded 2-prong wall outlet by use of a UL-listed adapter available at most local hardware stores.

The larger slot in the adapter must be aligned with the larger slot in the wall outlet to provide proper polarity in the connection of the power cord.

When disconnecting the power cord from the adapter, always hold the adapter in place with one hand while pulling the power cord plug with the other hand. If this is not done, the adapter ground terminal is very likely to break with repeated use.

If the adapter ground terminal breaks, DO NOT USE the refrigerator until a proper ground has been established.

Attaching the adapter ground terminal to a wall outlet cover screw does not ground the appliance unless the cover screw is metal, and not insulated, and the wall outlet is grounded through the house wiring. You should have the circuit checked by a qualified electrician to make sure the outlet is properly grounded.

CustomerService

Read and follow this Safety Information carefully.

SAVE THESE INSTRUCTIONS

4

Page 3 Page 5
Image 4
Page 3 Page 5
Contents Manuel d’utilisation Manual del propietarioCustomer Service GE & You, a Service PartnershipCongratulations You Are Now Part of the GE Family Operating Instructions Installation Troubleshooting TipsBefore You Throw Away Your Old Refrigerator or Freezer CFC DisposalCustomerService TroubleshootingTipsOperatingInstructions Control Settings How To Test TemperaturesAbout the controls on the refrigerator Fresh Food ControlSafetyInstructions About the refrigerator shelves and binsAdjustable Humidity Drawers About the storage drawersFruit and Vegetable Drawers Snacks DrawerAbout the ice service Ice Service CompartmentIcemaker Accessory Kit Water Filter AccessoryCare and cleaning of the refrigerator SafetyTips Instructions OperatingTroubleshootingTips CustomerService Light Bulb ReplacementPreparing for Vacation Freezer LightPreparing to install the refrigerator Refrigerator LocationClearances Base GrilleTools Required Reversing the door swingStabilizing Brake Remove the Fresh Food Door Removing the DoorsRemove the Freezer Door Reversing the Hardware Transfer Bottom Hinge Bracket to the LeftTransfer Center Hinge Bracket to the Left Reversing the Fresh Food HandleTransfer Top Hinge to the Left Reversing the Freezer Handle Transferring the Door StopsRehanging the Doors Rehang the Freezer DoorTransferring the Ice Tray Shelf on some models Rehanging the Fresh Food DoorAligning the Doors Before you call for service… Normal operating soundsCarries moisture into Refrigerator when doors are opened Fresh food or freezerCompartment too warm Frost or ice crystalsCustomer Warranty OperatingInstructions SafetyInstructions TroubleshootingTips Customer ServiceGE Will Replace What GE Will Not CoverSafety Instructions Troubleshooting Tips Customer ServiceGE et vous, un partenariat de service Félicitations Désormais vous faites partie de la famille GELa clientèle Se débarrasser du CFCRaccordement Électrique Conseils de dépannageRéglage des commandes Les commandes du réfrigérateurMesures de sécurité Les clayettes et les balconnets DépannageConseils de dépannage Service à la clientèle Les bacs de rangementService de glaçons Installation Service à la clientèle Conseils de dépannageDe sécurité Nécessaire de machine à glaçons automatiqueDe dépannage Service à la clientèle Entretien et nettoyage du réfrigérateurNettoyage de l’extérieur Nettoyage de l’intérieurSécurité Mesures deService à la clientèle PréparationDégagements RoulettesService à la Inversion de l’ouverture des portesOutils nécessaires Frein de stabilisationEnlèvement des portes Mesures de sécurité FonctionnementEnlèvement de la porte du réfrigérateur Enlèvement de la porte du congélateurDe dépannage Transfert des piècesTransfert à gauche de la charnière inférieure Transfert à gauche de la charnière intermédiaire Transfert de la poignée du réfrigérateurTransfert à gauche de la charnière supérieure Transfert de la poignée du congélateur Transfert des butées de porteRéinstallation des portes Réinstallation de la porte du congélateurRéinstallation de la porte du réfrigérateur Alignement des portesBruits de fonctionnement normaux Mesures de sécurité Fonctionnement InstallationAvant d’appeler un réparateur… Causes possibles Correctifs Le moteur fonctionne Pendant de longues’arrête fréquemment Les réfrigérateursGarantie DU Client Un service satisfaisant Numéros de servicePour les besoins particuliers Aux États-Unis Conseils de dépannage ¡Felicidades Ahora usted es parte de la familia GE GE y usted, una asociación de servicioSolucionar problemas Servicio Al consumidorAntes de deshacerse de su viejo refrigerador o congelador Deshacerse del CFCSolucionar problemas InstalaciónEl ajuste de los controles Los controles del refrigeradorSeguridad Entrepaños, fuentes y charolas del refrigerador ProblemasServicio al consumidor Solucionar Solucionar problemas Servicio al consumidor Gavetas para guardarInstalación Servicio al consumidor Solucionar problemas Servicio de hieloCompartimiento para hielos Accesorio para el filtro de aguaCuidado y limpieza del refrigerador Limpiar el exteriorLimpiar el interior Debajo del refrigeradorAtrás del refrigerador Preparación para vacacionesCambio de bombilla Luz del congeladorPreparación para instalar el refrigerador Ubicación del refrigeradorSolucionar Rejilla de la baseConsumidor Solucionar problemas Cambiar el modo de apertura de la puertaNotas importante Herramientas necesariasSacar las puertas Seguridad OperaciónSaque la puerta de los alimentos frescos Saque la puerta del congeladorInvertir la ferretería Para mover a la izquierda el soporte de la bisagra inferiorDesplace la bisagra central a la izquierda Mover la bisagra superior a la izquierdaCambiar de lado de la manija del congelador Cambio de lado de los topes de las puertasCambio del modo de apertura de las puertas Cambio del modo de apertura de la puerta del congeladorAlineación de las puertas Sonidos normales de la operación Antes de solicitar un servicio…Seguridad Operación Instalación El refrigerador noUna vibración ligera Es normalCompartimiento de Alimentos frescos oNotas Servicio al consumidorDurante GE reemplazará Lo que GE no cubriráUn año Cinco añosNúmeros de servicio Service Telephone Numbers Service Satisfaction

TCX22 specifications

The GE TCX22 is an advanced digital multimeter that stands out in the world of electronic measurement instruments. With its design tailored for professional and industrial applications, the TCX22 is packed with features that make it a versatile tool for electricians, engineers, and technicians.

One of the main features of the GE TCX22 is its broad range of measurement capabilities. It can accurately measure AC and DC voltage, current, resistance, capacitance, frequency, and even temperature. This wide range allows users to tackle various tasks, from simple circuit testing to complex system diagnostics, making it an indispensable tool in the field.

The TCX22 is equipped with advanced measurement technologies, including True RMS (Root Mean Square) capability. This feature allows the device to provide accurate readings for non-sinusoidal waveforms, which are commonly encountered in modern electrical systems. Whether measuring distorted signals from electronic devices or smooth sine waves, the TCX22 ensures precision, thereby improving reliability in testing results.

Another significant characteristic of the GE TCX22 is its large, backlit display, which enhances visibility in low-light conditions. This feature is especially useful for fieldwork or in dimly lit environments, enabling users to read measurements easily and accurately. The intuitive interface further simplifies operation, allowing users to navigate functions quickly and efficiently.

Durability is a hallmark of the TCX22, designed to withstand the rigors of daily use. With robust housing and protective features, it can endure drops and impacts, making it suitable for use in challenging environments. Furthermore, the device complies with high safety standards, offering over-voltage protection and ensuring safe operation while working with live circuits.

The GE TCX22 also boasts data logging capabilities, allowing users to store measurements for later analysis. This is particularly beneficial for users who need to track trends over time or provide documented evidence of test results to clients. The option to connect to a PC for further data management and analysis enhances its functionality even more.

In conclusion, the GE TCX22 is a powerful multimeter that combines versatility, accuracy, and durability. With its comprehensive measurement functions, advanced True RMS technology, user-friendly interface, and safety features, it stands out as a reliable choice for professionals looking to enhance their testing and diagnostic operations. Whether in the field or the lab, the TCX22 delivers exceptional performance, making it an essential instrument for anyone involved in electrical maintenance or engineering.
Top Page Image Contents