ELECTRICAL REQUIREMENTS AND GROUNDING INSTRUCTIONS
PLEASE READ CAREFULLY
MODELS:
CGX304U
CGX365U
CGX456U
Ratings see back cover
MODELS:
CD365U
CD456U
Ratings see back cover
ALWAYS DISCONNECT THE ELECTRICAL PLUG FROM THE WALL RECEPTACLE BEFORE SERVICING THIS UNIT.
The power cord on your cooktop is equipped with a three prong grounding plug with polarized parallel blades. This type of plug is for your protection against shock hazard. This cord must be plugged directly into a properly grounded
serving each appliance be provided.
! | CAUTION - ALL MODELS |
▲ | In Case of an Electrical Failure |
If for any reason a gas control knob is turned ON and there is no electric power to operate the electronic igniter of the cooktop, turn OFF all the gas control
knobs and wait 5 minutes for the gas to dissipate
before lighting the burner manually. On all models
only the standard burners can be turned on manually.
To light the burners manually, carefully hold a lighted match to the burner ports and push and turn the gas control knob to HI until it lights and then turn knob to desired setting. During a power failure you can use the standard cooktop burners, but each must be lit with a match. The ExtraLow® burners can not be used during a power failure. Refer to pages 5 through 7 and 11 for more information.
See Installation Instructions for electrical require- ments and grounding instructions, Page 24.
FOR PERSONAL SAFETY, THIS APPLIANCE MUST BE PROPERLY GROUNDED.
DO NOT UNDER ANY CIRCUMSTANCES CUT OR REMOVE THE THIRD (GROUND) PRONG FROM THE POWER CORD PLUG.
If the electrical outlet you intend to use does not accept the
Cooktop
➛ | ➛ |
| |
Three | Outlet |
Prong |
|
Plug |
|
PAGE 4