Burner Test and Adjustment, Test Rangetop Burners

Step 9: Burner Test and Adjustment

Install any loose components, such as burner caps and grates, that may have been removed earlier. Be certain that burner caps seat properly into the burner bases. Before testing operation of the appliance, verify that the unit and the gas supply have been carefully checked for leaks and that the unit has been connected to the electrical power supply. Turn the manual gas shut-off valve to the open position.

Test Rangetop Burners

Test Burner Ignition. Select a rangetop burner knob. Push in and turn counterclockwise to HI. The ignitor/spark module will produce a clicking sound. Once the air has been purged from the supply lines, the burner should light within four (4) seconds.

Test Flame: High Setting. Turn burner on to HI. See Figure 9 for appropriate flame characteristics.

If any of the rangetop burner continue to burn mostly or completely yellow, verify that the burner cap is positioned properly on the burner base, then retest. If flame characteristics do not improve, call Thermador®.

Test Flame: Low Setting. Turn burner on to SIM. Verify that the flame completely surrounds the burner. There should be a flame at each burner port and there should be no air gap between the flame and the burner. If any burners do not carry over, call Thermador®.

The two far left burners feature XLO®, that causes the flame to cycle on and off when the knob is set to the XLO range. This is normal operation.

Repeat the Ignition and Flame Test procedures, de- scribed above for each rangetop burner and the grill burner (if so equipped).

FIG. 9

Flame Characteristics

Yellow Flames:

Further adjustment is required.

Yellow Tips on Outer Cones:

Normal for LP Gas.

Soft Blue Flames:

Normal for Natural Gas.

If the flame is completely or mostly yellow, verify that the regulator is set for the correct fuel. After adjustment, retest.

Some orange-colored streaking is normal during the initial start-up.

Allow unit to operate 4-5 minutes and re-evaluate before making adjustments.

WHEN FLAME IS PROPERLY ADJUSTED:

There should be a flame at each burner port.

There should be no air gap between the flame and burner port.

The gas grill uses a tube-style burner that has an air shutter which allows adjustment to the amount of primary air inside the burner tube.

Air shutters of tube-style burners are pre-adjusted at the factory, and usually do not require readjust- ment except under rare conditions such as installa- tion at high altitude.

If grill burner/flame adjustment is required, go to the procedure: "Flame Adjustment (if necessary)".

P30 specifications

The Thermador P30 is a premium wall oven designed for culinary enthusiasts who demand precision, performance, and luxury in their kitchen. This standout appliance exemplifies Thermador’s commitment to innovation, offering a host of features and technologies that elevate the cooking experience.

One of the key features of the Thermador P30 is its powerful convection cooking system. This technology uses a fan and a third heating element to circulate hot air evenly throughout the oven, ensuring that every dish is cooked uniformly. This method not only enhances cooking efficiency but also significantly reduces cooking times, allowing users to prepare meals faster without compromising on quality.

The P30 also boasts a 10 culinary modes feature, which grants home cooks the ability to choose from various cooking settings specifically designed for specific types of dishes. Whether it’s baking, broiling, or roasting, each mode optimizes the oven’s performance to deliver perfect results. The precise temperature control ensures that even the most delicate recipes achieve professional-level outcomes.

Another highlight is the Wi-Fi connectivity that the Thermador P30 offers. Users can control and monitor their oven remotely through a smartphone app, allowing for seamless multitasking in the kitchen. This feature also includes voice control compatibility with smart home systems, providing added convenience for busy cooks.

The P30 is equipped with an elegant, touch-sensitive control panel that provides an intuitive interface, making navigation simple and straightforward. Its sleek design embodies modern kitchen aesthetics, with a tempered glass door that allows users to monitor cooking progress without losing heat.

Furthermore, ease of cleaning is a significant characteristic of the Thermador P30. The self-cleaning mode simplifies maintenance by using high temperatures to burn away food residue, allowing for a spotless interior without labor-intensive scrubbing.

Space optimization is another consideration. With a generous capacity, the Thermador P30 can accommodate multiple dishes simultaneously, making it ideal for entertaining or family meals. The oven is designed to be installed in various kitchen configurations, enhancing flexibility in layout.

Overall, the Thermador P30 is a sophisticated appliance that combines cutting-edge technology with user-friendly features and elegant design. It meets the demands of modern home chefs while providing the reliability and performance expected from a luxury brand. Whether baking a cake or roasting a turkey, the P30 ensures every culinary endeavor is executed to perfection, making it a valuable addition to any kitchen.