Customer Service Troubleshooting Tips Installation Instructions Operating Instructions Safety Information
Installing the water line.
Read these instructions completely and carefully.
Shut Off the Main Water Supply
Turn on the nearest faucet long enough to clear the line of water.
Install the Shutoff Valve
| Install the shutoff valve on the nearest frequently used drinking water line. | |||
1 | ||||
| Choose a location for the valve that is easily accessible. It is best to connect | |||
2 | ||||
| into the side of a vertical water pipe. When it is necessary to connect into a | |||
| horizontal water pipe, make the connection to the top or side, rather than at | |||
| the bottom, to avoid drawing off any sediment from the water pipe. | |||
| Drill a 1/4″ hole in the water pipe, using a sharp bit. Remove any burrs | |||
3 | ||||
| resulting from drilling the hole in the pipe. |
| ||
| Fasten the shutoff valve to the cold water pipe with the pipe clamp. | |||
4 | ||||
| Tighten the clamp screws until the sealing washer begins to swell. | |||
5 | ||||
| Do not overtighten or you may crush the copper tubing. |
| ||
| Pipe Clamp | Washer | Inlet End | |
|
|
| ||
|
|
|
|
|
Vertical Cold Water Pipe
26