8.Insert and tighten the ground screw into the left and right upper hinges with a philips screwdriver(+).
ground wire
9.Connect the electronic wire on the top of the refrigerator.
3.With the 10mm wrench, reattach 4 bolts to connect the rail with the door.
4.With the drawer pulled out fully, insert the drawer box into the rail system.
Reassembling the freezer door
1.Pull out the rails to the full length on each sidle of the cabinet evenly.
CAUTION
CAUTION
2.Hang the freezer door front onto open slot on the sides.
Slot
14_ setting up
Be careful not to scratch or dent the sliding
Make sure that you mount the freezer basket in the right position when removing
/installing the freezer door. Failing to do so may result in the door not opening or closing properly.
2012.7.3 10:53:28 AM |