Alto-Shaam 7.14ESG, 7.14es operation manual Important safety precautions, For operator safety

Page 10

OPERATING INSTRUCTIONS

important safety precautions

note: Automatic steam venting is a standard safety feature built into all Combitherm oven models. This feature vents all steam from the oven compartment immediately before cooking time expires or set probe temperature is reached.

This function is provided in all programmed and timed production when operating in any Steam, Combination, Convection, and Retherm cooking mode. Automatic steam venting does not function if the oven door is opened before time expires or when the oven has been set to continuous operation.

note: Use authorized combitherm oven cleaner only. unauthorized cleaning agents may discolor or harm interior surfaces of the oven. Read and understand label and material safety data sheet before using the oven cleaner.

for operator safety

note and observe all safety precautions located throughout this guide

D A N G E R

AT NO TIME SHOULD THE INTERIOR

OR EXTERIOR BE STEAM CLEANED,

HOSED DOWN, OR FLOODED WITH

WATER OR LIQUID SOLUTION OF

ANY KIND. DO NOT USE WATER JET

TO CLEAN.

SEVERE DAMAGE OR

ELECTRICAL HAZARD

COULD RESULT.

WARRANTY BECOMES VOID IF

APPLIANCE IS FLOODED

C A U T I O N

METAL PARTS OF THIS EQUIPMENT

BECOME EXTREMELY HOT WHEN

IN OPERATION. TO AVOID BURNS,

ALWAYS USE HAND PROTECTION

WHEN OPERATING THIS APPLIANCE.

DO NOT HANDLE PANS CONTAINING LIQUID

OR SEMILIQUID PRODUCTS POSITIONED ABOVE THE EYE LEVEL OF THE OPERATOR. SUCH PRODUCTS CAN SCALD AND CAUSE SERIOUS INJURY.

HOT STEAM CAUSES BURNS

rotate the door handle to the first open rotation position only. Wait until THE steam is VENTED before fully opening the door.

DO NOT USE THE ATTACHED HAND-HELD

HOSE TO SPRAY ANYTHING OTHER THAN THE INTERIOR OF THE COMBITHERM OVEN COMPARTMENT.

DO NOT USE THE SPRAY HOSE ON

THE SURFACE OF A HOT COOKING COMPARTMENT. ALLOW THE OVEN TO COOL TO A MINIMUM OF 150°F (66°C).

8

Image 10
Contents PhOne 262.251.3800 800.558.8744 USA/CANADA 14es CombiTouch 14esG CombiTouch262.251.7067 800.329.8744 U.S.A. only Recipe Programming Preprogrammed Bakery Recipes Using Preprogrammed RecipesEmergency Operation Mode 41-42 Error Codes 43-47 Preprogrammed Convenience Product RecipesCombitouch control Ecosmart technologyStart-up procedures Operating InstructionsMain Menu screen Control Panel Identification recipe menuUpload/download screen Settings screen Control Panel IdentificationOperating Instructions Main menu Icons Auxiliary function IconsMinutes Combitouch factory default settings70C 175C 70CImportant safety precautions For operator safetyTouch the displayed temperature Steam modePress the Steam Mode icon Touch the displayed timeSteam mode chef operating tips High Temp SteamingPress the combination Mode icon Combination modeCheck mark key to confirm change Combination mode chef operating tips Press the convection Mode icon Convection modeTo stop cooking program at any time Convection mode chef operating tips Convection Mode can be used to roast or bakeTemperature range of 245 to 320F 120 to 160C Retherm modePress the retherm Mode icon La carte Rethermalization Retherm mode chef operating tipsPlate covers must be used for on-the-plate regeneration Actual internal product temperature will appear Core temperature probe modeKey to confirm change Delta-T core temperature cooking mode Cool down feature Preheating featureGold-n-Brown feature Auxiliary functionsSelect desirED Cooking Mode and SET Mode Functions Reduced powerMulti-Shelf Timer Reduced fan speedLoad wood chips Chef Operating TIPCombiSmoker Procedures Select convection or combination cooking modeRecipe menu Program/edit recipes Main menu Cooking mode menuPreprogrammed recipes RecipeAdd a recipe Recipe programming via recipe management softwareRecipe programming via the touchscreen Edit a recipePreprogrammed bakery recipes Preprogrammed convenience product recipes Spring Rolls Combination Tater Tots CombinationPreprogrammed Fish & seafood recipes Preprogrammed Meat recipes Meat Loaf by Core Temp Combination Ham by Core Temp Delta-TLeg of Lamb by Core Temp Delta-T Pork Back Ribs Raw CombinationPreprogrammed Miscellaneous recipes Preprogrammed poultry recipes Preprogrammed vegetable recipes Parsnips Fresh Steam Green Beans Fresh SteamGreen Beans Frozen Steam Peas Frozen SteamHaccp Access Cleaning in process Cleaning mode menu Combi cleaner requirementOven too hot warning Preventative maintenance Roll-in cart/food trolley cleaning on equipped modelsCleaning and Preventive Maintenance Cleaning schedule Probe Cleaning ProceduresAutomatic steam generator flush CombiClean cleaning agentsDecalcification on boiler equipped models Emergency operation mode Select ONE of the available Cooking ModesTr o u b l e s h o o t i n g CombiTouch Error Codes E15 E51 See motor control error chart on next E93CombiTouch Motor Control Error Codes
Related manuals
Manual 6 pages 10.83 Kb Manual 50 pages 22.04 Kb Manual 6 pages 51.18 Kb

7.14es, 7.14ESG specifications

Alto-Shaam 7.14ESG and 7.14ES are innovative cooking equipment designed to enhance kitchen efficiency and food quality. These commercial convection ovens are ideal for restaurants, catering services, and institutional kitchens, delivering versatility and reliability.

One of the standout features of the Alto-Shaam 7.14ESG and 7.14ES is the patented Halo Heat technology. This unique heating system evenly distributes heat throughout the cooking cavity, ensuring consistent cooking results. Unlike traditional ovens that rely on harsh, direct heat, Halo Heat utilizes gentle, radiant heat, which helps retain moisture while minimizing the risk of overcooking. This technology is especially beneficial for slow-roasting, baking, and other gentle cooking techniques.

Both models come equipped with a robust, user-friendly control system that allows for precise temperature adjustments, making it easy for chefs to achieve their desired cooking results. The digital display provides clear visibility of the cooking settings, ensuring that operators can monitor and adjust temperatures effortlessly.

The Alto-Shaam 7.14ESG variant adds an extra layer of versatility with its steam injection feature. This capability allows for the introduction of humidity into the cooking environment, making it ideal for baking bread, creating tender meats, and even cooking vegetables to perfection. The steam function can be easily toggled on or off, giving chefs flexibility in their cooking methods.

Another notable characteristic of these models is their compact design, which is perfect for kitchens with limited space. Despite their smaller footprint, they offer ample cooking capacity, accommodating multiple trays simultaneously. This space-saving design does not compromise performance, making them an excellent choice for high-traffic kitchens.

Durability is a hallmark of the Alto-Shaam brand. Constructed with high-quality stainless steel, both models are built to withstand the rigors of a busy kitchen environment. The easy-to-clean surfaces and removable racks further enhance their practicality, ensuring that maintenance is straightforward and efficient.

In conclusion, the Alto-Shaam 7.14ESG and 7.14ES models exemplify innovation in commercial cooking equipment. With features like Halo Heat technology, steam injection, user-friendly controls, compact design, and durable construction, these ovens are engineered to meet the demands of modern culinary professionals, setting a new standard in the industry.