Denon AVR-682 manual Speaker system connections, Speaker Impedance, Connecting the speaker cords

Speaker system connections

•Connect the speaker terminals with the speakers making sure that like polarities are matched (< with <, > with >). Mismatching of polarities will result in weak central sound, unclear orientation of the various instruments, and the sense of direction of the stereo being impaired.

•When making connections, take care that none of the individual conductors of the speaker cord come in contact with adjacent terminals, with other speaker cord conductors, or with the rear panel.

NOTE:

NEVER touch the speaker terminals when the power is on. Doing so could result in electric shocks.

ENGLISH

Speaker Impedance

•When speaker systems A and B are use separately, speakers with an impedance of 6 to 16 Ω /ohms can be connected for use as front speakers.

•Be careful when using two pairs of front speakers (A + B) at the same time, since use of speakers with an impedance of 12 to 16 Ω /ohms.

•Speakers with an impedance of 6 to 16 Ω /ohms can be connected for use as center and surround speakers.

•The protector circuit may be activated if the set is played for long periods of time at high volumes when speakers with an impedance lower than the specified impedance are connected.

		Connecting the speaker cords
1. Loosen by turning	2. Insert the cord.	3. Tighten by turning
counterclockwise.		clockwise.

Connecting banana plugs

banana plug

1. Push the lever. 2. Insert the cord. 3. Return the lever.

Turn clockwise to tighten, then insert the banana plug.

CENTER SPEAKER SYSTEM

FRONT SPEAKER SYSTEMS

System A

FRONT SPEAKER SYSTEMS

System B

(L)

(R)

(L)

(R)

		AUDIO		DIGITAL	PRE OUT
	R	L	IN	IN
	AM		CD		SUB
LOOP					WOOFER
ANT.
			DVD/		DVD/
			VDP		VDP
	FM				IN
			TV/		TV/
	COAX.			COAXIAL
			DBS		DBS
	75
ANTENNA TERMINALS			VCR		VCR
FR	FL		CDR/	OPTICAL	MONITOR
			TAPE
SW	C		VCR		VCR
SR	SL		CDR/	OPTICAL
			TAPE		OUT
	EXT. IN		OUT	OUT	VIDEO

IN						OUT
DVD/	TV/	VCR	MONITOR		VCR
VDP	DBS
		S-VIDEO
					SPEAKER SYSTEMS
	B	FRONT			A		CENTER	SURROUND
				R		L		R	L
R		L
		SPEAKER IMPEDANCE					CENTER	/ 6	16
		FRONT		A OR B / 6		16
				A +	B / 6	16	SURROUND / 6		16

AC OUTLETS

AC 120V 60Hz

SWITCHED

TOTAL 120W(1A.) MAX.

Connection jack for subwoofer with built-in amplifier (super woofer), etc.

To achieve Dolby Digital (AC-3) playback effect, use a unit that can sufficiently reproduce frequencies of under 80 Hz.

•Precautions when connecting speakers

If a speaker is placed near a TV or video monitor, the

	(L)	(R)	colors on the screen may be disturbed by the
			speaker’s magnetism. If this should happen, move
			the speaker away to a position where it does not
			have this effect.
SURROUND SPEAKER SYSTEMS

13