Denon AVR-682, AVR-1602 Dimension setting, Center Width setting, Default setting, Panorama Mode

7 Set the various surround parameters.

• CINEMA EQ setting
	CINEMA EQ OFF
	ON	OFF
	or	or
• PANORAMA setting
	PANORAMA OFF
	ON	OFF
	or	or
• DIMENSION setting
	DIMENSION 3
0	3	6
	or	or

•CENTER WIDTH setting

	CENTER WIDTH O
0	4	7
	or	or

•DEFAULT setting

DEFAULT Y/N

Yes	Y/N	No
or		or

Select “Yes” to reset to the factory defaults.

Stop pressing buttons once you have completed setting the surround parameters. After several seconds the normal display reappears and the settings you have made are automatically set.

ENGLISH

NOTE:

•When making parameter settings, the display will return to the regular condition several seconds after the last button was pressed and the setting will be completed.

Surround parameters q

Pro Logic II Mode:

The Cinema mode is the standard required mode for all A/V systems.

The Music mode is recommended as the standard mode for autosound music systems (no video), and is optional for A/V systems.

The Pro Logic mode offers the same robust surround processing as original Pro Logic in case the source contents is not of optimum quality.

Select one of the modes (“Cinema”, “Music” or “Pro Logic”).

Panorama Mode:

This mode extends the front stereo image to include the surround speakers for an exciting “wraparound” effect with side wall imaging.

Select “OFF” or “ON”.

Dimension Control:

This control gradually adjust the soundfield either towards the front or towards the rear.

The control can be set in 7 steps from o to 6.

Center Width Control:

This control adjust the center image so it may be heard only from the center speaker; only from the left/right speakers as a phontom image; or from all three front speakers to varying degrees.

The control can be set in 8 steps from 0 to 7.

31