Beverage-Air 3311 manual Operation and Adjustments, Accessory Installation, How to Operate

Page 8
Electrical box
Mounting screws

Accessory Installation

The Model 3311 has several optional accessories that can be added to the unit in the field to meet your application’s needs. These accessories come with installation instructions.

•Spinner - Spinners are typically used in applications that add flavoring to a frozen neutral base product after it is dispensed.

Allows operator to serve a wider variety of frozen drinks from one machine (i.e. hazelnut added to cappuccino). See Figure E.

•Concealed Air Filter - Prevents dust from clogging the condenser. Ideal for applications near beaches. Helps maintain maximum air flow and optimum freezer performance. See Figure F.

NSF approved. Part # W0890200 stainless steel; W0890208 black.

•Exposed Air Filter - Similar to concealed air filter. Not NSF approved. Part # W0890206. See Figure G.

•Valve Lock Security Bracket - Part # W0471135. Ideal for self-service locations to prevent unauthorized use. Lock must be purchased separately. See Figure H.

•Remote Fill Control - Automatically refill the mix storage hopper. Provide additional labor savings by pre-mixing product automatically and monitoring system to maintain the mix hopper level.

•Private Label Header - A private label or different drink header can be installed by removing two screws from the electrical box cover. Place the header (transparency) between the clear and opaque plates (plastic lens). Put these in place under the lip of the machine top. Slip the electrical box cover back on to the machine and reinsert the screws. (See Figure I) Grindmaster offers a variety of drink headers including: frozen beverage, frozen lemonade, cappuccino, margarita, pina colada, frozen cocktail, frozen daiquiri and smoothie.

OPERATION AND ADJUSTMENTS

How to Operate

1.Sanitize unit following the cleaning instructions starting on page 10.

2.Fill the mix storage hopper following the instructions on page 10. Allow barrel to fill with product to proper level, then insert carb tube from parts bag in hole toward rear of hopper. See Figure J.

3.Turn power switch to “ON” position.

4.Allow product to freeze in barrel. Compressor will turn off when product reaches pre-set consistency.

5.To dispense product pull down valve handle and release when done.

6.If product consistency is not as desired, adjust per the instructions on page 7.

7.Refill mix storage hopper when “mix out” light is ON.

8.Clean the unit regularly following local health codes.

9.Perform maintenance when necessary to increase the life of the unit. See chart in this manual for regular maintenance schedule.

Mix Low Function

1.This model utilizes a simple float mechanism to sense when mix is low in hopper. (See Figure J) When the mix level in the hopper is low, the mix low light located in the front of the machine next to the valve block will illuminate.

NOTE: Do not run the unit under mix low conditions for long periods of time. This can affect machine performance or damage componentry.

Page 6

Spinner mounting bracket

Spinner

Figure E

FILTER

SLIDE THE FILTER IN BEHIND

Figure F THE FILTER PANEL, & IN FRONT OF THE EXISTING SIDE PANEL.

TO CHANGE, REMOVE, CLEAN AND/OR REPLACE.

Figure G

Figure H

Figure I

Model 3311

Page 7 Page 9
Image 8
Page 7 Page 9
Contents Model 3311 Beverage Freezer Manual Page Table of Contents OPERATOR’S Safety Precautions Freezer Application and SpecificationsModel Product TipsMix Considerations General Carburetor AssemblyFreezer Specifications Installation Shipment TransitReview hopper contents to make sure all parts are available Operation and Adjustments Accessory InstallationHow to Operate Mix Low FunctionConsistency Adjustment Figure JDrain and Rinse Care and CleaningDisassembly and Cleaning Tight. Do not use tools to tighten knobs Sanitizing and Refilling Figure CC Insert Retaining PinMaintenance Clean-In-Place Procedure Daily CleaningSuggested Daily Maintenance Parts Replacement SchedulePreventative Maintenance Procedure Every 6 to 12 Months How to Clean Exposed Filter Air-Cooled Unit Only How to Clean Concealed Filter Air-Cooled Unit OnlyHow to Adjust Belt How to Change Back Lit Sign Merchandiser BulbGeneral Troubleshooting Problem Probable Cause RemedyCheck List Exploded View Model 115V Air-Cooled Model Item no DescriptionExploded View Model 220V Air-Cooled Model Part Number DescriptionExploded View Model 115V Water-Cooled Model Model Base Assembly 115V Air-Cooled Model Part Description NumberModel Base Assembly 220V Air-Cooled Model Part Number DescriptionModel Base Assembly 115V Water-Cooled Model Model Electrical Box Assembly 115V Model AC/WC Units Model Electrical Box Assembly 220V Air-Cooled Model Model Wiring Diagram 115V Air-Cooled Model Model Wiring Diagram 220V Air-Cooled Model Model Wiring Diagram Water-Cooled Model Model 3311 Compressor Wiring Model Ladder Diagram 115V Air-Cooled Model Model Ladder Diagram 220V Air-Cooled Model Model Ladder Diagram 115V Water-Cooled Model Model 3311 AC/WC Units Spinner Hook-Up 115V Model 220V Model Model Refrigeration 115V Air-Cooled Model Model Refrigeration 220V Air-Cooled Model Model Refrigeration 115V Water-Cooled Model Model Refrigeration Schematic AC Units 115V & 220V Models Model Refrigeration Schematic Water-Cooled Model Model Grindmaster Corporation Form # WH-312-02 W0600110

3311 specifications

The Beverage-Air 3311 is a top-tier commercial refrigerator meticulously designed to meet the demanding needs of foodservice establishments. Known for its reliability and efficiency, this model is a favorite among restaurant owners, bars, and cafés. The primary focus of the Beverage-Air 3311 is to provide optimal storage conditions for beverages, including soft drinks, juice, and bottled water, ensuring they are kept at ideal temperatures for maximum freshness.

One of the standout features of the Beverage-Air 3311 is its spacious interior, which provides ample storage for a variety of beverages. Measuring 33 inches wide, this unit can accommodate multiple shelves, each adjustable to suit the specific height requirements of various bottles and containers. The unit typically comes with sturdy, epoxy-coated wire shelves that not only ensure uniform cooling but also provide resistance against spills and easy cleaning.

Equipped with a powerful refrigeration system, the Beverage-Air 3311 utilizes environmentally friendly refrigerants, aligning with modern standards for sustainability. The compressor is designed for efficiency, providing rapid cooling and maintaining consistent temperatures across the unit while minimizing energy consumption. This feature is particularly valuable for businesses aiming to reduce operating costs while maintaining high product quality.

The Beverage-Air 3311 also includes a self-closing door with magnetic gaskets, which helps maintain the internal temperature and prevents cold air loss, thereby enhancing energy efficiency. Additionally, the doors are equipped with locks to ensure the security of valuable beverages during off-hours.

For enhanced visibility, the Beverage-Air 3311 can feature a glass door option, allowing customers and staff to easily view the stored products without opening the door. This feature not only improves accessibility but also adds an aesthetic appeal to the display.

In terms of durability, the exterior of the Beverage-Air 3311 is crafted from high-quality stainless steel, providing resistance against rust and corrosion while ensuring an easy-to-clean surface. The interior is designed with seamless construction, which further reduces the chances of bacteria buildup and makes maintenance straightforward.

Overall, the Beverage-Air 3311 combines advanced technology with thoughtful design features, making it an ideal choice for those looking to enhance their beverage service. With its capacity, efficiency, and durability, this commercial refrigerator stands out as a reliable partner in the fast-paced environment of food and beverage service.
Top Page Image Contents