![](/images/new-backgrounds/1078891/7889169x1.webp)
O P E R AT I N G I N S T RU C T I O N S
USING THE SELF-CLEANING OVEN
BEFORE A CLEAN CYCLE
When running a self clean cycle, it is recommended that a kitchen window be opened or the use of ventilation fan or hood be used.
Remove the oven racks, broiler pan, broiler grid, all cookware and any
aluminum foil from the
IMPORTANT: The health of some birds is extremely sensitive to the fumes given off during the self- cleaning cycle of any range. Move birds to another well ventilated room.
NOTES:
•Soil on the front frame of the range and outside the gasket on the door will need to be cleaned by hand. Clean these areas with hot water,
•DO NOT clean the gasket. The fiberglass material of the oven door gasket cannot withstand abrasion. It is essential for the gasket to remain intact. If you notice it becoming worn or frayed, replace it.
•Wipe up any heavy spillovers on the oven bottom.
•Make sure the oven light bulb cover is in place and the oven light is off.
•Use caution when opening the oven after the self- clean cycle has ended. The oven may still be hot.
ENGLISH
HOW TO SET THE OVEN FOR CLEANING
Touch the “SELF CLEAN” pad once for a 3 hour cycle, twice for a 2 hour cycle or three times for a 4 hour cycle. A
Touch the “START” pad.
The door locks automatically. The display will show the clean time remaining. It will not be possible to open the oven door until the temperature drops below the lock temperature and the DOOR LOCKED light goes off.
The oven shuts off automatically when the clean cycle is complete.
When the DOOR LOCKED light is off, the door will unlock automatically.
•The words DOOR LOCKED will flash and the oven control will signal if you set the clean cycle and forget to close the oven door.
•To stop a clean cycle, touch the “CLEAR OFF” pad. When the DOOR LOCKED light goes off indicating the oven has cooled below the locking temperature, open the door.
35