Mitsubishi Electronics A0567659 Batch Interval or Timed Interval Printout, Print Inventory

Page 45

•Clear Inventory

•Display Time & Date

Batch Interval or Timed Interval Printout

The Batch Interval item under the Recipe menu works in conjunction with the Auto Print Interval to set the number of batches between printouts or on a timed interval between printouts.

Time Printout

When entering the Report Setup menu, the operator will have to decide whether the printout should be timed and by the number of batches between each printout. The operator will have to toggle between the “Recipe Format” and the “Report Setup” screens to configure the settings properly.

If you want to print out on a time format, press the button next to the “Auto Print/Clear Interval” key. The screen will then prompt the operator to set the time interval in hours (1 to 24).

If you want to change the hours between printouts, press the “Auto Print/Clear Interval” key again to change the value to the desired time.

The operator will then need to program in when they want to begin the timed printouts. Simply select the time (0-23, {midnight =0} on a 24-hour clock) and press the “Done” key to retain the current settings in the “Report Setup” screen.

Batch Printout

If you wish to print out the inventory information on a batch interval basis, then simply enter in the desired batch interval under the Recipe Format screen and the printouts will occur each time that the number of batches programmed is produced. To set the batch interval, press the bottom button “Weigh Every Batch”, “Weigh Every Other Batch,” etc. to change this setting, keep pressing this button until the desired option is reached. Once you have chosen the number of batches that will be produced between printouts, press the “Done” key to return to the Setup screen. If the “Auto Print Inventory” feature has been enabled in the “Report Setup” screen, then the printer will produce printouts according to the settings instructed above.

Print Inventory

The print inventory menu item is used to produce on demand, inventory printouts. Before selecting this item, be sure that the printer is properly connected and ready. This function will generate an inventory printout with the current date and time information.

Display Time and Date

The display Time and Date item in the upper right corner of the “Report Setup” menu is used to verify the current time and date information.

Blender Calibration

Note: It is not necessary to calibrate the weight scale on a brand new blender, although it is recommended that the calibration be checked periodically to

Gravimetric Batch Blenders w/Mitsubishi Control Chapter 3: Installation

45

Page 44 Page 46
Image 45
Page 44 Page 46
Contents Write Down Your Serial Numbers Here For Future Reference Shipping Information Credit Returns Warranty ReturnsTable of Contents Troubleshooting Addendum Safety How to Use This ManualSafety Symbols Used in this Manual Gravimetric Batch Blender Safety Tags Description Wear Safety Glasses and Work Gloves Follow all Safety CodesGeneral Responsibility ResponsibilityRemember Operator ResponsibilityReporting a Safety Defect Maintenance ResponsibilityCustomer Service AccessoriesFunctional Description Models Covered in This ManualTypical Features & Components Mechanical FeaturesBoth Blender Styles Blender Controller shown with Mitsubishi Touch Screen Controller FeaturesMaterial Supply Hoppers Slide Gate & Auger Blender System Component DescriptionSlide Gate Metering Assemblies Slide Gate Blenders Auger Blenders available with a Choice of Mixers Auger Metering AssembliesTypical Weigh Hopper Weigh HopperMix Chamber Weigh Hopper Discharge ValveOpti-Mixer HC MixerController Pushbutton & Touchscreen Tags Button Function Operator Control PanelTypical Setup Screens Logo Options Remote Touch ScreenPneumatic Slide Gate Below Mixer Safety Circuit Standards Safety Devices and InterlocksFail Safe Operation Safety Device Lock-OutsTwist Cap Plug Electric Safety Interlock Switch All ModelsMounting Configuration InstallationUncrating the Equipment Rigging and Placing the UnitMachine Mount Mezzanine Mounted Batch Blender Mezzanine MountTypical Central Blender Layout Floor Mount Central BlenderMechanical Installation Electrical InstallationCustomer-Supplied Components Pneumatic InstallationWeigh Hopper Installation Slide Gate Models only Set-upStroke Limiters for Metering Gates Load Cell Mechanical Stop Adjustment Load Cell AdjustmentLogo Final ConnectionsController Setup Recipe Entry FormatsRecipe Format Menu Quickset Mode Most common in injection molding Percentage Mode Most common in extrusion and blow molding Switching Modes Parts Mode Often used in Compounding ApplicationsCurrent Recipe Menu Feeder Metering OrderInventory Shutdown Batch Size MenuBatch Ready Mode AutoStart FeatureWeigh Every Batch Every Second Batch Every Third BatchEvery Fourth Batch Printer Features Print Inventory Batch Interval or Timed Interval PrintoutDisplay Time and Date Blender CalibrationPage Why Blender Calibration is Necessary Feeder Calibration Auger Blenders Re-Mix Timer Mix TimerWeigh Hopper Dump Delay Time Weigh Hopper Dump TimeWeigh Hopper Dump Cycle Feeder Alarm Setup & Flags Setting Date & TimeMixer Options Timed Mixing OptionMAX Hopper Weight Exceeded Power Interruption Additional settings that usually do not have to be changed Network Communications Baud Rate & I.D. SettingsShutting Down Blender Initial StartupOperation Quick Start ProcedureStart-up General OperationExisting Recipes Display Description LCD Controller Description & OperationRecipe Page Start Slide Gate & Auger Blender Control System Menu StructureRecipe Book Storage Menus Control FunctionsSave Running Recipe to the Book Display Recipe ContentsLoad a Saved Recipe from the Book Erase Recipe or Entire BookFeeder Clean Out Color Changes Page Standard Run Time Displays Shutting Down the Blender Maintenance Preventative Maintenance SchedulePhotocopy this page for your maintenance records Corrective Maintenance Preventative MaintenanceElectrical Internal Components of the Control PanelOutput Signals from Programmable Controller Input Signals to Programmable ControllerPneumatic System Maintenance Troubleshooting Problem Corrective actionIntroduction ±10%. This voltage must remain constant with all the motors Problem Corrective action Warranty will be voided Problem Corrective action Warranty Specifications WarrantyWarranty Restrictions Warranty LiabilitiesTechnical Specifications Customer ResponsibilitiesAnnex B Information Auger Blender -E Series Specifications Slide Gate Blender -E Series SpecificationsSpare Parts List Drawings & DiagramsTypical Slide Gate Model Assembly Overview Slide Gate Gravimetric Batch Blending SystemsModel 4000 Auger Gravimetric Batch Blending SystemsModel 002 with Opti-Mixer Model 012 with Opti-Mixer Model 012 with Rotary HC mixerModel 012 with Common Feeder Components Model 060 with Rotary HC Mixer Model 060 with OptimixerModel 060 with Common Feeder Components Typical Mixer Section Front Typical Opti-Mixer Front Assembly DetailTypical Mixer Section Rear Typical Opti-Mixer Rear Assembly DetailTypical Mixer Frame Typical Opti-Mixer Frame AssemblyTypical Slide Gate Diamond Gate Assembly Detail Typical Gate AssemblyTypical Supply Hopper Typical Slide Gate-014 Series Hopper Assembly DetailTypical Weigh Hopper & Load Cell Detail Technical Assistance Blender Identification Serial Number TagProgrammable Settings Service Supervisor InformationFactory Setup Menu Available Selections AddendumFeed Algorithm Options Screen Advanced Weight Options ScreenMechanical Options Screen Feed Calibration Options ScreenCustomer Setup Menu Feeder SetupNetwork Setup UnitsAlarm Log Alarm SetupPasswords Programmable FeaturesUser Password Maintenance Password

A0567659 specifications

Mitsubishi Electronics A0567659 is an advanced display module that embodies the cutting-edge technology and innovation that Mitsubishi is renowned for. Designed primarily for industrial applications, this display module stands out due to its robust performance and exceptional image quality, making it an ideal choice for various sectors including automation, transportation, and manufacturing.

One of the main features of the A0567659 is its high-resolution display capability. With a resolution that provides clear and detailed visuals, users can expect enhanced readability and precision in their data visualization tasks. This is particularly important in industrial environments where the accuracy of information can significantly impact operational efficiency.

The display utilizes advanced LCD technology, ensuring vibrant colors and high contrast ratios that make the content easily viewable under different lighting conditions. The screen's brightness is adjustable, allowing users to customize their visual experience according to the specific needs of their workplace. The durability of the A0567659 is another highlight, as it is built to withstand harsh conditions including extreme temperatures and exposure to dust and moisture. This ruggedness is essential for maintaining long-term performance in demanding environments.

In terms of connectivity, the A0567659 is equipped with multiple interfaces, making it versatile for integration with various systems. Whether it’s connecting to a PLC, computer, or other control devices, users can benefit from seamless communication across their technological ecosystem. This feature underlines Mitsubishi's focus on facilitating smooth integration within existing infrastructures.

Another significant characteristic is its energy efficiency. The A0567659 is designed to consume less power while delivering high performance, aligning with the growing trend of sustainable technology solutions. This aspect not only helps in reducing operational costs but also makes it an environmentally friendly choice for businesses looking to minimize their carbon footprint.

Furthermore, Mitsubishi Electronics places a strong emphasis on user-friendliness. The display module is designed with an intuitive interface that simplifies the operation for users at all skill levels. This ease of use, combined with thorough documentation and support, ensures that users can harness the full potential of the A0567659 without extensive training or technical expertise.

In conclusion, the Mitsubishi Electronics A0567659 is a powerful display module characterized by its high-resolution display, durability, versatile connectivity, and energy efficiency. It represents a robust solution for industries that demand reliable and high-quality visual communication tools.
Top Page Image Contents