Smeg cooktop, CIR60X manual Instructions for the user, Using The Hob, Ignition of the burners

Contents installation and operating instructions CIR60X cooktop Index THE MANUFACTURER DECLINES ALL RESPONSIBILITY FOR IMPROPER USE Introduction1. INSTRUCTIONS FOR SAFE AND PROPER USE NEVER UNPLUG BY PULLING ON THE CABLETHE PLATE ON THE CASING MUST NOT BE REMOVED Instructions for the installer 2. POSITIONING OF HOB2.1.1 Attachment to support structure Instructions for the installer 2.2 Clearance above and around domestic appliances REQUIREMENTS3 For definition of hob, see Clause 2.3 Room ventilation 2.4 Discharge of combustion products3. GAS CONNECTION 4. ELECTRICAL CONNECTION 5. GAS CONNECTION 5.1 Connection to LPG 5.2 Ventilation of rooms5.3 Discharge of combustion products 6. ADAPTATION TO DIFFERENT TYPES OF GAS 6.1 Removing the hob6.2 Regulation for LPG Burner7.1 Regulation of minimum for natural gas 7. FINAL OPERATIONS6.3 Regulation for natural gas 7.2 Regulation of minimum for LPGThis must be done by a qualified technician 7.3 Arrangement of burners on hob7.4 Lubrification of gas taps BURNERS8. USING THE HOB Instructions for the user8.1 Ignition of the burners 8.4 Electric elements 8.2 Practical advice for using the burners8.3 Diameter of containers Burner8.4.2 Using the electric elements 9.2 Cleaning of cooking hob components 9. CLEANING AND MAINTENANCE9.1 Cleaning Before any intervention, disconnect the power supply of the device9.3 Preventive maintenance 9.2.1 Ignition plugs and safety devices9.2.2 The cover CAUSE 10.PROBLEMS AND CAUSESPROBLEM WHAT TO DO