Smeg CIR60X, cooktop manual Problems And Causes, Instructions for the user, What To Do

Contents installation and operating instructions CIR60X cooktop Index NEVER UNPLUG BY PULLING ON THE CABLE Introduction1. INSTRUCTIONS FOR SAFE AND PROPER USE THE MANUFACTURER DECLINES ALL RESPONSIBILITY FOR IMPROPER USETHE PLATE ON THE CASING MUST NOT BE REMOVED 2.1.1 Attachment to support structure Instructions for the installer2. POSITIONING OF HOB Instructions for the installer REQUIREMENTS 2.2 Clearance above and around domestic appliances3 For definition of hob, see Clause 2.4 Discharge of combustion products 2.3 Room ventilation3. GAS CONNECTION 4. ELECTRICAL CONNECTION 5. GAS CONNECTION 5.3 Discharge of combustion products 5.1 Connection to LPG5.2 Ventilation of rooms 6.1 Removing the hob 6. ADAPTATION TO DIFFERENT TYPES OF GASBurner 6.2 Regulation for LPG7.2 Regulation of minimum for LPG 7. FINAL OPERATIONS6.3 Regulation for natural gas 7.1 Regulation of minimum for natural gasBURNERS 7.3 Arrangement of burners on hob7.4 Lubrification of gas taps This must be done by a qualified technician8.1 Ignition of the burners 8. USING THE HOBInstructions for the user Burner 8.2 Practical advice for using the burners8.3 Diameter of containers 8.4 Electric elements8.4.2 Using the electric elements Before any intervention, disconnect the power supply of the device 9. CLEANING AND MAINTENANCE9.1 Cleaning 9.2 Cleaning of cooking hob components9.2.2 The cover 9.3 Preventive maintenance9.2.1 Ignition plugs and safety devices WHAT TO DO 10.PROBLEMS AND CAUSESPROBLEM CAUSE