Smeg cooktop, CIR60X manual Adaptation To Different Types Of Gas, Removing the hob

Contents installation and operating instructions CIR60X cooktop Index THE MANUFACTURER DECLINES ALL RESPONSIBILITY FOR IMPROPER USE Introduction1. INSTRUCTIONS FOR SAFE AND PROPER USE NEVER UNPLUG BY PULLING ON THE CABLETHE PLATE ON THE CASING MUST NOT BE REMOVED 2.1.1 Attachment to support structure Instructions for the installer2. POSITIONING OF HOB Instructions for the installer 2.2 Clearance above and around domestic appliances REQUIREMENTS3 For definition of hob, see Clause 2.3 Room ventilation 2.4 Discharge of combustion products3. GAS CONNECTION 4. ELECTRICAL CONNECTION 5. GAS CONNECTION 5.3 Discharge of combustion products 5.1 Connection to LPG5.2 Ventilation of rooms 6. ADAPTATION TO DIFFERENT TYPES OF GAS 6.1 Removing the hob6.2 Regulation for LPG Burner7.1 Regulation of minimum for natural gas 7. FINAL OPERATIONS6.3 Regulation for natural gas 7.2 Regulation of minimum for LPGThis must be done by a qualified technician 7.3 Arrangement of burners on hob7.4 Lubrification of gas taps BURNERS8.1 Ignition of the burners 8. USING THE HOBInstructions for the user 8.4 Electric elements 8.2 Practical advice for using the burners8.3 Diameter of containers Burner8.4.2 Using the electric elements 9.2 Cleaning of cooking hob components 9. CLEANING AND MAINTENANCE9.1 Cleaning Before any intervention, disconnect the power supply of the device9.2.2 The cover 9.3 Preventive maintenance9.2.1 Ignition plugs and safety devices CAUSE 10.PROBLEMS AND CAUSESPROBLEM WHAT TO DO