Smeg DI614H instruction manual When Cleaning and Maintaining the Appliance, For Great Britain only

Page 10

Installation instructions

WHEN CLEANING AND MAINTAINING THE APPLIANCE:

BEFORE CARRYING OUT ANY WORK, ALWAYS UNPLUG THE APPLIANCE FROM THE ELECTRICAL SUPPLY OR SWITCH OFF THE ALL-POLE DISCONNECTION DEVICE.

FOR GREAT BRITAIN ONLY:

THIS APPLIANCE MUST BE EARTHED.

Fuse replacement

If the mains lead of this appliance is fitted with a BS 1363A 13amp fused plug, to change a fuse in this type of plug use an A.S.T.A. approved fuse to BS 1362 type and proceed as follows:

1.Remove the fuse cover A and fuse B.

2.Fit replacement 13A fuse into fuse cover.

3.Refit both into plug.

The fuse cover must be refitted when changing a fuse and if the fuse cover is lost the plug must not be used until a correct replacement is fitted.

Correct replacement are identified by the colour insert or the colour embossed in words on the base of the plug.

Replacement fuse covers are available from your local electrical store.

10

Image 10

Contents Guide for Using the Dishwasher and the Washing Program Page Rqwhqwven Safety instructions Safety instructions Aquastop Models Installation instructions Water supply connection Connecting to the Water SupplyDrain Connection Electrical connection and precautions If the Appliance is Provided with a Plugless Supply CordWhen Cleaning and Maintaining the Appliance For Great Britain onlyInstructions for the User Buzzer enablingWater hardness Language depending on modelControl panel Description of controlsInformation display Switching on Programme Selection introductionRe-using last programme used Rapid programmingStandard programmes Programme Table Special Programme Features Changing the Programme Button D Button E NormInstructions for the User To Save Energy and Protect the Environment Using the water softening system User instructionsUsing the rinse aid and detergent dispensers Adjusting the Rinse AID Dispenser Setting Adding the Rinse AIDAdding the Detergent User instructions General warnings and recommendations Items which are not dishwasher-safe EN 50242 Standard Loads for Certification Bodies Using the basketsLower Basket Loading the Lower Basket Cutlery Basket Upper Basket Loading the Upper BasketAdjusting the Upper Basket Cleaning the Water Intake Filter Cleaning the Spray ArmsCleaning the Filter Unit Prolonged DisuseBefore Starting the Dishwasher After Prolonged Disuse If the dishes fail to dry or remain dull, check that Temperature sensor k.o TroubleshootingSafety device tripped Acquastop failureLevel pressure switch k.o Technical Data Page Page 19 590 1216