Smeg DI614H Troubleshooting, Acquastop failure, Safety device tripped, Heating k.o, Drain blocked

Page 39

EN

Instructions for the User

 

 

11. Troubleshooting

The dishwasher has an autodiagnosis system capable of detecting and indicating a preset series of possible malfunctions.

If a malfunction occurs, the relative name indicating the possible cause of the malfunction appears on the DISPLAY (G). The following table summarises the main possible malfunctions and provides brief descriptions.

TABLE OF MALFUNCTIONS DETECTED BY THE AUTODIAGNOSIS SYSTEM

MALFUNCTION - DESCRIPTION

Acquastop failure

The anti-flooding system has been activated (for the relevant models only). The system is tripped in case of water leaks. Contact the after-sales service.

Safety device tripped

The system which limits the water level inside the dishwasher has been tripped. Interrupt the programme and switch off the dishwasher. Switch the dishwasher back on, programme it again and start the washing cycle. If the problem persists, contact the after-sales service.

Heating k.o.

The water is not heated or the heating parameters are not correct. Repeat the washing programme; if the problem persists, contact the after-sales service.

Temperature sensor k.o.

Interrupt the programme and switch off the dishwasher. Switch the dishwasher back on, programme it again and start the washing cycle. If the problem persists, contact the after-sales service.

Tap turned off

The appliance does not take in water or does not do so correctly. Check that the water connections are correct, the water intake tap is turned on and the filter is not fouled. If the problem persists, contact the after-sales service.

Drain blocked

If the appliance does not pump out the water or does not do so correctly. Check that the drain hose is not kinked or crushed and that the syphon and filter are not fouled. If the problem persists, contact the after-sales service.

39

Page 38 Page 40
Image 39
Page 38 Page 40
Contents Guide for Using the Dishwasher and the Washing Program Page Rqwhqwven Safety instructions Safety instructions Aquastop Models Installation instructions Connecting to the Water Supply Water supply connectionDrain Connection If the Appliance is Provided with a Plugless Supply Cord Electrical connection and precautionsFor Great Britain only When Cleaning and Maintaining the ApplianceBuzzer enabling Instructions for the UserLanguage depending on model Water hardnessDescription of controls Control panelInformation display Programme Selection introduction Switching onRapid programming Re-using last programme usedStandard programmes Programme Table Special Programme Features Changing the Programme Norm Button D Button EInstructions for the User To Save Energy and Protect the Environment User instructions Using the water softening systemUsing the rinse aid and detergent dispensers Adding the Rinse AID Adjusting the Rinse AID Dispenser SettingAdding the Detergent User instructions General warnings and recommendations Items which are not dishwasher-safe Using the baskets EN 50242 Standard Loads for Certification BodiesLower Basket Loading the Lower Basket Cutlery Basket Loading the Upper Basket Upper BasketAdjusting the Upper Basket Cleaning the Spray Arms Cleaning the Water Intake FilterProlonged Disuse Cleaning the Filter UnitBefore Starting the Dishwasher After Prolonged Disuse If the dishes fail to dry or remain dull, check that Acquastop failure TroubleshootingSafety device tripped Temperature sensor k.oLevel pressure switch k.o Technical Data Page Page 19 590 1216
Top Page Image Contents