Smeg DI614H instruction manual Rapid programming, Re-using last programme used

Page 15

Instructions for the User	EN

Shown on the display:

•Press (D) or (E) to select rapid programming (see “Rapid programming”).

•Press (B) to exit rapid programming and choose standard programming (see “Standard programming”).

5.3 Rapid programming

•Press on/off button (A) to switch machine on.

•Press (D) in repetition to display the type of dirt on dishes, on the top line of the display (G).

•Press button (E) in repetition to select one of the possible washing modes, on the bottom line of the display.

The most suitable washing programme for the settings made will be selected. To start this programme, simply close the door (buzzer sounds, if enabled).

This will sound again at the end of the programme if enable.

5.4 Re-using last programme used

•Press on/off button (A) to switch machine on.

When the initial system message for programme setting appears in the display window select “No” (button B) to disable rapid programming and the system will offer the last programme performed.

To start this programme, simply close the door (buzzer sounds, if enabled).

This will sound again at the end of the programme if enabled.

15

Image 15

Contents Guide for Using the Dishwasher and the Washing Program Page Rqwhqwven Safety instructions Safety instructions Aquastop Models Installation instructions Connecting to the Water Supply Water supply connectionDrain Connection If the Appliance is Provided with a Plugless Supply Cord Electrical connection and precautionsFor Great Britain only When Cleaning and Maintaining the ApplianceBuzzer enabling Instructions for the UserLanguage depending on model Water hardnessDescription of controls Control panelInformation display Programme Selection introduction Switching onRapid programming Re-using last programme usedStandard programmes Programme Table Special Programme Features Changing the Programme Norm Button D Button EInstructions for the User To Save Energy and Protect the Environment User instructions Using the water softening systemUsing the rinse aid and detergent dispensers Adding the Rinse AID Adjusting the Rinse AID Dispenser SettingAdding the Detergent User instructions General warnings and recommendations Items which are not dishwasher-safe Using the baskets EN 50242 Standard Loads for Certification BodiesLower Basket Loading the Lower Basket Cutlery Basket Loading the Upper Basket Upper BasketAdjusting the Upper Basket Cleaning the Spray Arms Cleaning the Water Intake FilterProlonged Disuse Cleaning the Filter UnitBefore Starting the Dishwasher After Prolonged Disuse If the dishes fail to dry or remain dull, check that Acquastop failure TroubleshootingSafety device tripped Temperature sensor k.oLevel pressure switch k.o Technical Data Page Page 19 590 1216