
| Instructions for the User | EN | |
| 
 | 
 | 
 | 
3. BEFORE USING AND SETTING UP YOUR APPLIANCE
The electronic control system allows you to customise your appliance in a number of ways.
Use button (D) to select the customisation you require, then button
(E)to enable (1) / disable (0) or modify the parameters. To exit the programming function press button (B).
| Procedure | Customisation | Settings | |
| long press on | Buzzer enabling | Enable (1) / Disable (0) | |
| button (D) | |||
| 
 | 
 | ||
| second press | Water hardness | from h0 to h5 | |
| on button (D) | |||
| 
 | 
 | ||
| third press on | Choice of language | Language: | |
| button (D) | (on some models only) | English | 
3.1 Buzzer enabling
With this function enabled (1), a buzzer sounds whenever the door is opened and closed with a program running or selected, at the end of the cycle and during programming procedures.
If it is disabled (0), the buzzer never sounds.
11