EN | Instructions for the User | |
|
|
|
5.5 Standard programmes
Press on/off button (A) to switch machine on.
When the initial system message for programmes setting appears in the display window select “No” (button B) to disable rapid programming.
To select another programme, press (B) repeatedly until the programme you want is displayed
The display will show the programme selected, the temperature and the duration of the programme. To start this programme close the door (buzzer sounds, if enabled). It will sound again at the end of the programme (if activated).
See TABLE OF PROGRAMMES on following pages.
The second line of the display will now show the scheduled duration of the programme in minutes.
•The temperature which appears before the programme name indicates its type (e.g. 45° delicate programme, 55° economy, 65° intensive, etc.); the actual temperature is displayed, stage by stage, while washing is in progress.
•Programmes duration, temperature and consumption figures are guideline, since they depend on various factors, such as type of load, intake water temperature, room temperature, etc.
If the dishwasher door is open or not properly closed, the washing cycle will not start
If the door is opened with the dishwasher in operation, a long buzzer sounds and “Pause” appears on the bottom line of the DISPLAY (G). Next time the door is closed the programme will continue from where it stopped.
If the temperature inside the tank exceeds 50°C, the programme will restart after about 30 seconds.
16