Smeg DI614H instruction manual Special Programme Features

Page 18

EN

Instructions for the User

 

 

 

7. SPECIAL PROGRAMME FEATURES

The top line displays the temperature in the tank, alternating (every 4 seconds) with the programme being performed and the current programme stage.

The bottom line will show the programme duration “Duration

XXminutes”, where XX is the time left before the end of the programme, in minutes.

7.1 If DELAYED START (C) is set, until the programme starts the second line shows the message “Start in YY hh/mm”, where YY are the hours (from 1-12/1-24depending on model) or minutes (when less than 1 hour) left before the programme starts.

Any warning messages (e.g. "No salt”) will appear on the DISPLAY

(G)during the washing stage, alternating with the time left to the end of the programme.

If the function 3/1 PRODUCTS function (only available on some models) is set, the no salt and no rinse aid warning messages do not appear.

7.2 INTERRUPTING A PROGRAMME

To interrupt a programme, press the START/PAUSE button (F) again and keep it pressed until “Pause” appears on the bottom line of the DISPLAY (G).

To restart the programme, repeat this operation until "Duration XX min” reappears on the bottom line of the display.

Opening the door also cuts out the programme in progress, but this is not recommended, since water splashes or gusts of steam might escape. When the door is closed the programme restarts automatically, even it was interrupted by pressing the START/PAUSE button (F).

18

Page 17 Page 19
Image 18
Page 17 Page 19
Contents Guide for Using the Dishwasher and the Washing Program Page Rqwhqwven Safety instructions Safety instructions Aquastop Models Installation instructions Connecting to the Water Supply Water supply connectionDrain Connection Electrical connection and precautions If the Appliance is Provided with a Plugless Supply CordWhen Cleaning and Maintaining the Appliance For Great Britain onlyInstructions for the User Buzzer enablingWater hardness Language depending on modelDescription of controls Control panelInformation display Switching on Programme Selection introductionRe-using last programme used Rapid programmingStandard programmes Programme Table Special Programme Features Changing the Programme Button D Button E NormInstructions for the User To Save Energy and Protect the Environment Using the water softening system User instructionsUsing the rinse aid and detergent dispensers Adjusting the Rinse AID Dispenser Setting Adding the Rinse AIDAdding the Detergent User instructions General warnings and recommendations Items which are not dishwasher-safe Using the baskets EN 50242 Standard Loads for Certification BodiesLower Basket Loading the Lower Basket Cutlery Basket Upper Basket Loading the Upper BasketAdjusting the Upper Basket Cleaning the Water Intake Filter Cleaning the Spray ArmsCleaning the Filter Unit Prolonged DisuseBefore Starting the Dishwasher After Prolonged Disuse If the dishes fail to dry or remain dull, check that Temperature sensor k.o TroubleshootingSafety device tripped Acquastop failureLevel pressure switch k.o Technical Data Page Page 19 590 1216
Top Page Image Contents