Andrew 9.3-Meter ESA manual Elevation Jackscrew Assembly Step

Elevation

Jackscrew

Assembly

Step 1

Step 2

Refer to Figure 20. Apply supplied RTV to indicated flange surfaces and attach 200013- 3/200048 elevation jack screw to 200128 elevation extension assembly as shown.

•Use 1-1/4 by 3-1/2 in (89 mm) bolts, washers and nuts

Note: Mounting hardware is included with corresponding jack assembly hardware kit.

APPLY RTV

APPLY RTV

3/4 x 3” LG. (75 mm)

APPLY RTV

Figure 20

Attach 200022 pivot assembly to enclosure tripod leg assembly Note: This may also be performed during reflector assembly.

•Use 3/4 by 3.0 in (75 mm) bolts, lockwashers and nuts.

25 Installation Procedures