Andrew 9.3-Meter ESA manual X 3 LG mm 200031A

Step 4

Step 5

Refer to Figure 14. Apply supplied RTV to flange surfaces and loosely attach 200699/200021 elevation pivot assemblies to rear of enclosure drum assembly

•Use 3/4 by 3.0 inch (75 mm) hardware

3/4 x 3” LG. (75 mm)

200031A

Figure 14

Slightly raising assembly and loosely attach 200016/200015 joint assemblies to bottom portions of panning assembly.

•Use 7/8 by 2-1/4 inch (57 mm) hardware

19 Installation Procedures