Chapter 1 General Information
Table
Specifications are valid when the unit is calibrated at ambient temperature after a 5 minute warmup. Typical values are provided for reference only and are not guaranteed.
Description
Site Master:
S113C, S114C
S331C, S332C
Frequency Accuracy (RF Source Mode) Frequency Resolution: S113C, S114C S331C, S332C
SWR: Range Resolution
Return Loss: Range Resolution
Vertical Range Return Loss: SWR:
Horizontal Range
Horizontal Resolution for Coax (rectangular windowing)
Value
Frequency Range:
2 to 1600 MHz
25 to 4000 MHz
75 parts per million @ 25°C*
10kHz
100kHz 1.00 to 65.00 0.01
0.00 to 54.00 dB
0.01 dB
0.00to 54.00 dB
1.00to 65.00
0 to ((# of data points
(1.5 108)(Vp)
F
Where Vp is the relative propagation velocity of the cable; dp is the number of data points
(130, 259, 517); F is the stop frequency minus the start frequency (Hz)
Horizontal Resolution for Waveguide |
|
|
|
| |
1.5 108 ( 1 (F / F )2) | |||||
| |||||
|
| c | 1 |
| |
| F |
|
| ||
| Where FC is the waveguide cutoff frequency (Hz); | ||||
| F1 is the start frequency (Hz); F is the stop fre- | ||||
| quency minus the start frequency (Hz) | ||||
RF Power Monitor: |
|
|
|
| |
Display Range | |||||
| 10.0 pW to 100.0 kW | ||||
Detector Range | |||||
Offset Range | 0 to +60.0 dB |
|
| ||
Resolution | 0.1 dB or 0.1 W |
|
| ||
Test Port Connector | Type N, 50, female | ||||
***Immunity to Interfering signals | |||||
up to the level of: S113C, S114C | +17 dBm | +10 dBm | |||
S331C, S332C | +17 dBm | ||||
Maximum Input without Damage: |
|
|
|
| |
Test Port, Type N (f) | +20 dBm, 50, +50 VDC | ||||
RF Power Detector | +20 dBm, 50, +50 VDC | ||||
Measurement Accuracy:
Measurement accuracy depends on calibration components. Precision calibration components have a directivity of 42 dB.
Cable Insertion Loss: | Range | 0.00 to 54.00 dB |
| Resolution | 0.01 dB |
Transmission Line Loss |
| |
| Range | 0.00 to 20.00 dB |
| Resolution | 0.01 dB |
1 - 4