Chapter 2 Functions and Operations
AVERAGE
CHANNEL POWER — Activates Channel Power measurement. Chan- nel power is measured in dBm. Channel Power density is measured in dBm/Hz.
ACP — Accesses a menu of Adjacent Channel Power ratio measurement options:
CENTER FREQ - Activates the center frequency function and sets the Anritsu Site Master to the center frequency. A specific center frequency can be entered using the keypad or Up/Down arrow key. Select the GHz, MHz, kHz, or Hz softkey to accept the center frequency input.
MAIN CHANNEL BW - Sets the bandwidth of the main channel. ADJACENT CHANNEL BW - Sets the bandwidth of the adjacent chan- nel.
CHANNEL SPACING - Sets the channel spacing. MEASURE - Begins the ACP measurement. BACK - Returns to the previous menu.
BACK - Returns to the previous menu.
TRACE — Activates a menu of trace related functions. Use the correspond- ing softkey to select the desired trace function.
NOTE: For this function, Trace A is always the runtime trace, and Trace B is al- ways a saved trace. Refer to page for information on saving and recalling traces.
RESET A — Clears the current runtime trace.
A B — Stores the current runtime trace into the Trace B buffer.
A – B A — Performs a subtraction trace math operation.
A + BA — Performs an addition trace math operation.
TRACE B — Accesses a menu of saved trace options.
VIEW B - Provides a trace overlay of the saved trace with the current runtime trace.
CLEAR B - Turns off trace overlay.
RECALL TRACE B - Recalls the saved trace B buffer.
BACK — Returns to the previous menu level.