True Manufacturing Company TR1RRI-1S Installation / Operation Instructions Ownership, Uncrating

Page 6

True Food Service Equipment, Inc.

INSTALLATION / OPERATION INSTRUCTIONS

INSTALLATION / OPERATION INSTRUCTIONS OWNERSHIP

To insure that your unit works properly from the first day, it must be installed properly. We highly recommend a trained refrigeration mechanic and electrician install your True equipment. The cost of a professional installation is money well spent.

Before you start to install your True unit, carefully inspect it for freight damage. If damage is discovered, immediately file a claim with the delivery freight carrier.

True is not responsible for damage incurred during shipment.

REQUIRED TOOLS

Adjustable Wrench

 

Level

 

Phillips Head Screwdriver

 

 

UNCRATING

Step 1

The following procedure is recommended for uncrating the unit:

A.Remove the outer packaging, (cardboard and bubbles or styrofoam corners and clear plastic). Inspect for concealed damage. Again, immedi- ately file a claim with the freight carrier if there is damage.

B.Move your unit as close to the final location as possible before removing the wooden skid.

C.Remove door bracket on glass door models. Do not throw this bracket away. For future cabinet movement this bracket will need to be installed so glass door does not receive any damage. (See image for bracket removal)

Note: Keys for coolers with door locks are located in warranty packets.

REMOTE UNITS (This section applies to

 

 

remotes only!)

• Contact True Technical Service for BTU

 

• Remote cabinets must be ordered as remote.

requirements.

 

 

We do not recommend converting for a standard

• No wiring necessary between cabinet and

 

 

self contained to remote system.

condensing unit.

 

• All remote cabinets must be hard wired.

• All remote condensing units purchased from

 

No castors available.

True are 208/230 volts single phase.

 

• All remote cabinets come standard using 404A

If you have any questions regarding this sec-

 

 

refrigerant.

tion, please call True at 1-(800)-325-6152.

 

• All remote units come standard with expansion

 

 

 

valve, liquid line solenoid, heated condensate

 

 

 

pan, and defrost timer when applicable.

 

 

4

............ www.truemfg.com

4

Image 6
Contents TR, TA, & TG Models Spec Series True Food Service Equipment, Inc Safety Precautions Before You Throw Away Your Old Refrigerator or Freezer Proper Disposal of the RefrigeratorUSE of Extension Cords Refrigerant DisposalHOW to Connect Electricity Installation / Operation Instructions Ownership Required ToolsUncrating Wire Gauge for 2% Voltage Drop in Supply Circuits Installation of Legs and Castors LocatingSealing Cabinet to Floor Warranty is void if ventilation is insufficientLeveling OptionalRamp Installation for ROLL-IN Cabinets Digital Temperature Display Electrical InstructionsStartup Pilaster Installation & Operation Installation Procedures Wire ShelvesRequired Tools Pilaster INSTALL/OPERATION Installation Procedures PilastersHeated Cabinet Shelving INSTALLATION/ Operation Installing Shelf Standards in Heated Cabinets See ImageTA, TG, TR2R-2S/2F-2S TA, TG, TR1R-1S/1F-1STA, TG, TR3R-3S/3F-3S 890140Freezers Defrost Time Clock Operation Grasslin Timer MAINTENANCE, Care & Cleaning Cleaning the Condenser Coil Single Door Freezer unit Brush ProvidedImportant Warranty Information Temperature Control Adjustment for High Altitude only TermsStainless Steel Equipment Care and Cleaning Light Bulb Replacement Disconnect power to cabinet before Replacing light bulbsWarranty Information U.S.A & Canada only