True Manufacturing Company TR2RRT-2S-2S, TR1RRI-1S installation manual Safety Precautions

Page 3

True Food Service Equipment, Inc.

SAFETY INFORMATION

How to Maintain Your Unit to Receive the Most Efficient and Successful Operation

You have selected one of the finest commercial refrigeration units made. It is manufactured under strict quality controls with only the best quality materials available. Your TRUE unit when properly maintained will give you many years of trouble-free service.

WARNING!

Use this appliance for its intended purpose as described in

this Owner Manual.

SAFETY PRECAUTIONS

When using electrical appliances, basic safety precautions should be followed, including the following:

This refrigerator must be properly installed and located in accordance with the Installation Instructions before it is used.

Do not allow children to climb, stand or hang on the shelves in the refrigerator. They could damage the refrigerator and seriously injure themselves.

Do not touch the cold surfaces in the freezer compartment when hands are damp or wet. Skin may stick to these extremely cold surfaces.

Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance.

Keep fingers out of the “pinch point” areas; clearances between the doors and between the doors and cabinet are necessarily small; be careful closing doors when children are in the area.

NOTE: We strongly recommend that any servicing be performed by a qualified individual.

Unplug the refrigerator before cleaning and making repairs.

Setting temperature controls to the 0 position does not remove power to the light circuit, perimeter heaters, or evaporator fans.

1

www.truemfg.com

1

Image 3
Contents TR, TA, & TG Models Spec Series True Food Service Equipment, Inc Safety Precautions Refrigerant Disposal Proper Disposal of the RefrigeratorUSE of Extension Cords Before You Throw Away Your Old Refrigerator or FreezerHOW to Connect Electricity Installation / Operation Instructions Ownership Required ToolsUncrating Wire Gauge for 2% Voltage Drop in Supply Circuits Locating Installation of Legs and CastorsOptional Warranty is void if ventilation is insufficientLeveling Sealing Cabinet to FloorRamp Installation for ROLL-IN Cabinets Digital Temperature Display Electrical InstructionsStartup Pilaster Installation & Operation Installation Procedures Wire ShelvesRequired Tools Installation Procedures Pilasters Pilaster INSTALL/OPERATIONInstalling Shelf Standards in Heated Cabinets See Image Heated Cabinet Shelving INSTALLATION/ OperationTA, TG, TR1R-1S/1F-1S TA, TG, TR2R-2S/2F-2S890140 TA, TG, TR3R-3S/3F-3SFreezers Defrost Time Clock Operation Grasslin Timer Single Door Freezer unit Brush Provided MAINTENANCE, Care & Cleaning Cleaning the Condenser CoilImportant Warranty Information Terms Temperature Control Adjustment for High Altitude onlyStainless Steel Equipment Care and Cleaning Disconnect power to cabinet before Replacing light bulbs Light Bulb ReplacementWarranty Information U.S.A & Canada only