Self-cleaning | Gaggenau EB 210/211 specification

6.2 Self-cleaning

Fig. 34

The rear plate is catalytically enamelled.

You can order catalytically enamelled plates for the sides and top as special accessories.

In this mode, soiling on the catalytic interior plates (accessories) combusts at temperatures around 300 °C.

In the event of extreme soiling, coarse greasy residues must be removed from the oven before cleaning.

The non-catalytic parts such as the muffle base, the door inside and the glass pane are not cleaned. These parts must be cleaned beforehand.

Proceed as follows:

–Remove all loose inside parts such as the gridiron or the baking stone from the oven interior.

–Remove the grease filter. Push the grease filter up and remove it from the oven interior.

–Close the oven door.

–Turn the “Mode" control knob to the (Grilling with hot air) setting.

–Turn the “Temperature" control knob to 300 °C.

–Enter a duration (see page 14). We recommend a time of 1:30 h. You should modify the cleaning time depending on the degree of soiling. The setting should be at least 1 hour and no more than 2 hours.

The catalytic cleaning operation begins immediately after you have set the timer.

The catalytic cleaning operation can also be started automatically at a later time if you enter a switch-off time.

You can display the current catalysis time by pressing the (Timer) key.

Turn the temperature control knob back to the 0 setting after the self-cleaning process has ended.