RECORDING
BASIC RECORDING
This section explains how to record from the tuner, CD player, or external equipment.
3
2
s |
|
a |
|
4 | MODE |
1
Preparation
•Use Type I (normal) tapes only.
•Set the tape to the point where recording will start.
1Insert the tape to be recorded on into deck.
Insert the tape with the side to be recorded on first facing out from the unit and the exposed side down.
2 Press TAPE/REV MODE to select the reverse mode.
To record on one side only, select p.
To record on both sides, select [or ].
When using the remote control, press MODE.
3Press function (TUNER, AUX/VIDEO or CD) and
prepare the source to be recorded.
To record from a CD, press CD and load the disc.
To record from a radio broadcast, press TUNER/BAND and
tune in to a station.
To record from a connected source, press AUX/VIDEO and
play.
4Press wREC/REC MUTE to start recording.
When the selected function is CD, playback and recording start simultaneously.
To stop recording, press s.
To pause recording, press a (applicable when the source is TUNER or AUX/VIDEO). To resume recording, press it again.
11 ENGLISH
Sound adjustment during recording
The output volume and tone of the speakers or headphones may be freely varied without affecting the recording.
INSERTING BLANK SPACE
Insertion of
1Press wREC/REC MUTE during recording or while in recording pause mode.
4on the display flashes for 4 seconds and the tape runs without recording. After 4 seconds, the deck enters the recording pause mode.
2Press a to resume recording.
To insert a blank space of less than 4 seconds, press wREC/REC MUTE again while 4 is flashing.
To insert blank spaces of more than 4 seconds, after the deck enters the recording pause mode, press wREC/REC MUTE again.
Each time wREC/REC MUTE is pressed, a
*This unit does not have the function to locate the beginning of track.
Recording cannot be done when TAPE function is selected.
To erase a recording
1Insert the tape to be erased into the deck.
2Set the tape to the point where the erasure is to be started.
3Set the reverse mode by pressing TAPE/REV MODE.
4Press AUX/VIDEO and turn the connected equipment off.
5Press w REC/REC MUTE to start the erasure.
11 | 10/4/2000, 5:09 PM |