Aiwa XR-M150 manual VIDEO/AUX Jacks, SUB Woofer 3JACK, Timerand, Connections

Page 17

OTHER CONNECTIONS

CONNECTING OPTIONAL EQUIPMENT

SUB WOOFER

Refer to the operating instructions of the connected equipment for details.

The connecting cords are not supplied. Obtain the necessary connecting cords.

Consult your local Aiwa dealer for optional equipment.

VIDEO/AUX JACKS

This unit can input analog sound signals through these jacks. Use a cable with RCA phono plugs to connect audio equipment (turntables, LD players, VCRs, TV, etc.).

Connect the red plug to the VIDEO/AUX R jack, and the white plug to the VIDEO/AUX L jack.

When connecting a turntable

Use an Aiwa turntable equipped with a built-in equalizer amplifier.

SUB WOOFER 3JACK

Connect an optional powered sub woofer with built-in amplifier to the jack.

LISTENING TO EXTERNAL SOURCES

TIMERAND

 

1

CLOCK

POWER

 

To play equipment connected to the VIDEO/AUX jacks, proceed

CONNECTIONS

as follows.

OTHER

1 Press AUX/VIDEO.

 

“AUX” appears on the display.

 

2Play the connected equipment.

To change a source name in the display

When AUX/VIDEO is pressed, “AUX” is displayed initially. It can be changed to “TV” or “VIDEO”.

With the power on, press POWER while pressing AUX/VIDEO. Repeat the procedure to select one of the source names.

En

ENGLISH 16

15-18/XR-M150<U>/Eng

16

10/4/2000, 5:08 PM

Image 17
Contents XR-M150 Installation PrecautionsElectric Power Outdoor AntennaTable of Contents Connections Before connecting the AC cordConnect the supplied antennas Connect the speaker cord to the main unitConnecting AN Outdoor Antenna Remote ControlBefore Operation Setting ECO Power Economizing ModeVolume Audio AdjustmentsSuper T-BASS System QsoundPreset Number Tuning Manual TuningPresetting Stations Loading Disc Basic OperationsPlaying Disc RANDOM/REPEAT PlayBlank Skip Play Programmed PlayInserting a Tape Playing Back a TapePlayback TapeBasic Recording Press TAPE/REV Mode to select the reverse modeInserting Blank Space Insert the tape to be recorded on into deckPress numbered buttons 0-9 to designate the tape Length AI Edit RecordingInsert the tape into deck Press numbered buttons 0-9 to designate Tape length Press Mode to select side B and program Tracks for side BPress the numbered buttons 0-9 and +10 to Program a track Repeat for the rest of the tracks for sidePress Display on the remote control Setting the ClockTimer ClockPrepare the source Setting the TimerTimer Recording VIDEO/AUX Jacks TimerandSUB Woofer 3JACK ConnectionsCare and Maintenance Specifications Page/Páginas/Page Name/Piezas/NomName/Piezas/Nom Page/Páginas/Page