Aiwa XR-M150 manual Audio Adjustments, Volume, Super T-BASS System, Qsound

Page 7

SOUND

AUDIO ADJUSTMENTS

QSOUND

 

JOG MODE

 

 

DISPLAY

VOL/

VOL

 

MULTI JOG

 

VOLUME

Turn VOL/MULTI JOG on the main unit, or press VOL ( k or i ) on the remote control.

The volume level is displayed as a number from 0 to MAX (31). The volume level is automatically set to 20 when the power is turned off with the volume level set to 21 or more.

To see the current volume level, press DISPLAY on the remote control twice.

SUPER T-BASS SYSTEM

The T-BASS system enhances the realism of low-frequency sound.

Press JOG MODE once, then turn VOL/MULTI JOG within 4 seconds to change the T-BASS level.

The level changes as follows. Select one of the three levels or the off position to suit your preference.

T - BASS 0 T - BASS 1 T - BASS 2 T - BASS 3 (off)

(off)

Low frequency sound may be distorted when the T-BASS system is used for a disc or tape in which low frequency sound is originally emphasized. In this case, cancel the T-BASS system.

GRAPHIC EQUALIZER

 

PREPARATIONS

 

 

JOG MODE

 

 

 

EQ

SOUND

VOL/

 

MULTI JOG

 

 

This unit provides the following three different equalization curves.

ROCK: Powerful sound emphasizing treble and bass

POP: More presence in the vocals and midrange

JAZZ: Accented lower frequencies for jazz-type music

Press JOG MODE repeatedly until “GEQ” is displayed, then turn VOL/MULTI JOG within 4 seconds to select an equalization curve.

The equalization mode is displayed as follows:

GEQ OFF GEQ ROCK

(cancel)

GEQ JAZZ GEQ POP

En

GEQ

To cancel the selected mode

Press JOG MODE repeatedly until “GEQ” is displayed, then turn VOL/MULTI JOG within 4 seconds until “GEQ OFF” is displayed.

To select with the remote control

Press EQ repeatedly until the desired equalization curve is displayed.

GEQ OFF GEQ ROCK

(cancel)

GEQ JAZZ GEQ POP

QSOUND

This system provides a rich, three dimensional sound area for stereo sources.

You can enjoy more enhanced sound.

Press QSOUND

To cancel QSOUND

Press QSOUND again. “OFF” is displayed.

At higher volumes, turning QSOUND on may cause sound distortion. In this case, turn the volume down.

ENGLISH 6

05-08/XR-M150<U>/Eng

6

10/4/2000, 5:07 PM

Image 7
Contents XR-M150 Outdoor Antenna PrecautionsInstallation Electric PowerTable of Contents Connect the speaker cord to the main unit Before connecting the AC cordConnections Connect the supplied antennasConnecting AN Outdoor Antenna Remote ControlBefore Operation Setting ECO Power Economizing ModeQsound Audio AdjustmentsVolume Super T-BASS SystemPresetting Stations Manual TuningPreset Number Tuning RANDOM/REPEAT Play Basic OperationsLoading Disc Playing DiscBlank Skip Play Programmed PlayTape Playing Back a TapeInserting a Tape PlaybackInsert the tape to be recorded on into deck Press TAPE/REV Mode to select the reverse modeBasic Recording Inserting Blank SpaceInsert the tape into deck AI Edit RecordingPress numbered buttons 0-9 to designate the tape Length Repeat for the rest of the tracks for side Press Mode to select side B and program Tracks for side BPress numbered buttons 0-9 to designate Tape length Press the numbered buttons 0-9 and +10 to Program a trackClock Setting the ClockPress Display on the remote control TimerTimer Recording Setting the TimerPrepare the source Connections TimerandVIDEO/AUX Jacks SUB Woofer 3JACKCare and Maintenance Specifications Name/Piezas/Nom Page/Páginas/Page Name/Piezas/NomPage/Páginas/Page