•During “"” play, random play can be performed.
•When you start random play during “" 1” play, the repeat play will be canceled.
•To repeat only selected tracks, program the desired tracks (see below) before choosing “"” function.
•During “"” play or “"1” play, the remaining time cannot be checked.
1 Press MODE repeatedly in stop mode until “PRGM” appears on the display.
“PRGM” flashes on the display.
PRGM
BLANK SKIP PLAY
The silent portions between tracks recorded on a CD can be skipped during playback.
1Press CD BLANK SKIP.
“CD BLANK SKIP ON” is displayed and “ 
” will appear in the display.
2Press dto start playback.
The silent portions between tracks will be skipped, and the sound will be played back without interruption. If a track fades out (ends with the sound gradually decreasing), the
To return to normal playback
Press CD BLANK SKIP again so that “CD BLANK SKIP OFF”
is displayed, and “
” in the display will disappear.
•There may be a case where BLANK SKIP PLAY does not function correctly.
•BLANK SKIP PLAY is automatically canceled when performing AI EDIT RECORDING (page 12), PROGRAMMED EDIT RECORDING (page 13), PROGRAMMED PLAY recording (page 9), RANDOM PLAY recording (page 8) or “"1” PLAY recording (page 8).
PROGRAMMED PLAY
Up to 30 tracks can be programmed from the inserted disc.
2
REPEAT
1 
4
f,g
s
Use the remote control.
9 ENGLISH
2Press numbered buttons 0-9 and +10 to program
a track.
Example:
To select the 12th track, press +10 and 2.
To select the 20th track, press +10, +10 and 0.
|
|
|
| Total playing time of | ||
Program number |
| the selected tracks | ||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Selected track number | Total number of |
| selected tracks |
3Repeat step 2 to program other tracks.
4Press cto start play.
To check the program
Each time for gis pressed in stop mode, a track number and program number will be displayed.
To clear the program
Press s in stop mode.
To add tracks to the program
Before playing, repeat step 2. The track will be programmed after the last track.
To change the programmed tracks
Clear the program and repeat all the steps again.
To play the programmed tracks repeatedly
After programming the tracks, press REPEAT on the remote control, “"” lights up on the display.
•During programmed play, you cannot perform random play, “" 1” play, check the remaining time or select a track.
•If programmed time is more than 99:59 minutes, total playing time is shown as
10/4/2000, 5:09 PM