Aiwa XR-M150 manual Remote Control, Connecting AN Outdoor Antenna

Page 5

To stand the AM loop antenna on a surface

Fix the claw to the slot.

To position the antennas

FM feeder antenna:

Extend this antenna horizontally in a T-shape and fix its ends to the wall.

AM loop antenna:

Position for the best reception.

Be sure to connect the speaker cords correctly. Improper connections can cause short circuits in SPEAKERS terminals.

REMOTE CONTROL

 

PREPARATIONS

 

 

Inserting batteries

 

Detach the battery cover on the rear of the remote control and

 

insert two size AA (R6) batteries.

 

AA (R6)

When to replace the batteries

The maximum operational distance between the remote control and the sensor on the main unit should be approximately 5 meters (16 feet). When this distance decreases, replace the batteries with new ones.

Using the remote control

The instructions in this manual refer mainly to the buttons on the main unit. Buttons on the remote control with the same names as those on the main unit can be used as well.

To use FUNCTION on the remote control

The FUNCTION substitutes for the function buttons (TAPE, TUNER, AUX/VIDEO, CD) on the main unit.

Each time FUNCTION is pressed while power is on, the next

function is selected cyclically.

En

Do not leave objects generating magnetism, such as credit cards, near the speakers, as these objects may be damaged.

Do not bring the FM antenna near metal objects or curtain rails.

Do not bring the AM antenna near other optional equipment, the stereo system itself, the AC cord or speaker cords, since noise will be picked up.

Do not unwind the AM antenna wire.

CONNECTING AN OUTDOOR ANTENNA

For better FM reception, use of an outdoor antenna is recommended.

Connect the outdoor antenna to FM 75 Ω terminals.

ANTENNA

LOOP

cPLAY on the remote control

The function is the same as that of d on the main unit.

FUNCTION

cPLAY

• If the remote control is not going to be used for an extended period of time, remove the batteries to prevent possible electrolyte leakage.

• The remote control may not operate correctly when:

- The line of sight between the remote control and the remote sensor beside the DEMO/ECO is exposed to intense light, such as direct sunlight

- Other remote controls are used nearby (those of a television, etc.)

To connect other optional equipment page 16

ENGLISH 4

01-04/XR-M150<U>/Eng

4

10/4/2000, 5:07 PM

Image 5
Contents XR-M150 Installation PrecautionsElectric Power Outdoor AntennaTable of Contents Connections Before connecting the AC cordConnect the supplied antennas Connect the speaker cord to the main unitConnecting AN Outdoor Antenna Remote ControlBefore Operation Setting ECO Power Economizing ModeVolume Audio AdjustmentsSuper T-BASS System QsoundPreset Number Tuning Manual TuningPresetting Stations Loading Disc Basic OperationsPlaying Disc RANDOM/REPEAT PlayBlank Skip Play Programmed PlayInserting a Tape Playing Back a TapePlayback TapeBasic Recording Press TAPE/REV Mode to select the reverse modeInserting Blank Space Insert the tape to be recorded on into deckPress numbered buttons 0-9 to designate the tape Length AI Edit RecordingInsert the tape into deck Press numbered buttons 0-9 to designate Tape length Press Mode to select side B and program Tracks for side BPress the numbered buttons 0-9 and +10 to Program a track Repeat for the rest of the tracks for sidePress Display on the remote control Setting the ClockTimer ClockPrepare the source Setting the TimerTimer Recording VIDEO/AUX Jacks TimerandSUB Woofer 3JACK ConnectionsCare and Maintenance Specifications Page/Páginas/Page Name/Piezas/NomName/Piezas/Nom Page/Páginas/Page