PROGRAMMED EDIT RECORDING
s
8 | 4, 5 |
| |
| 3, 7 |
1 | 2 |
| |
| f,g |
In the programmed edit recording function, the track can be programmed while checking the remaining time on each side of the tape as the tracks are programmed.
The programmed edit recording will not start from a point halfway in the tape. The tape must be recorded on from the beginning of either side.
Use the remote control from step 2 to 7.
1Insert the tape into deck.
Insert the tape with the side to be recorded on first facing out from the unit.
2 Press FUNCTION repeatedly until “CD” is displayed and load the disc.
3 Press MODE repeatedly until “PRGM EDIT” appears on the display.
“EDIT” lights up and “PRGM” flashes on the display.
PRGM EDIT
4Press numbered buttons 0-9 to designate the
tape length.
10 to 99 minutes can be specified.
Example: When using a
•The fand gare also available to designate the tape length.
|
|
|
| Maximum recording | |
Tape length |
|
| time for side A | ||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Tape side A (front side)
13 ENGLISH
5Press the numbered buttons 0-9 and +10 to
program a track.
Example: To select the 10th track, press +10 and 0.
Selected | Program | Remaining | Programmed | ||||||
track | number | time of side A | track | ||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
6Repeat step 5 for the rest of the tracks for side
A.
A track whose playing time is longer than the remaining time cannot be programmed.
7Press MODE to select side B and program the
tracks for side B.
After confirming “B” on the display, repeat step 5.
Tape side B (reverse side)
8Press wREC/REC MUTE to start recording.
The tape is rewound to the beginning of the front side, the lead segment is played through for 10 seconds, and recording starts. When recording on the front (side A) ends, recording on the back (side B) starts.
To stop recording
Press s. Recording and CD play stop simultaneously.
To check the order of the programmed track numbers
Before recording, press MODE on the remote control to select side A or B, and press f or g repeatedly.
|
|
| Program | Programmed | |||||
| Track number number | track numbers | |||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Tape side
To change the program of each side
Press MODE on the remote control to select side A or B, and press sto clear the program on the selected side. Then program tracks again.
To clear the edit program
Press s twice so that “EDIT” disappears on the display.
•Recording is inhibited if the erasure prevention tab on either side of the tape is broken off.
13 | 10/4/2000, 5:09 PM |