Whirlpool W10249202A Troubleshooting, Changing the Light Bulbs, Refrigerator Operation

Page 10

Changing the Light Bulbs

NOTE: Not all bulbs will fit your refrigerator. Be sure to replace the bulb with an appliance bulb of the same size, shape, and wattage.

1.Unplug refrigerator or disconnect power.

2.Remove the bulb from behind the control panel in the refrigerator or from behind the light shield in the freezer (on some models). Replace it with an appliance bulb of the same wattage.

3.Plug in refrigerator or reconnect power.

TROUBLESHOOTING

First try the solutions suggested here or visit our website and reference FAQs (Frequently Asked Questions)

to possibly avoid the cost of a service call.

In the U.S.A., www.whirlpool.com In Canada, www.whirlpool.ca

Refrigerator Operation

The refrigerator will not operate

WARNING

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.

Do not remove ground prong.

Do not use an adapter.

Do not use an extension cord.

Failure to follow these instructions can result in death, fire, or electrical shock.

Power cord unplugged? Plug into a grounded 3 prong outlet.

Is outlet working? Plug in a lamp to see if the outlet is working.

Household fuse blown or circuit breaker tripped? Replace the fuse or reset the circuit breaker. If the problem continues, call an electrician.

Control(s) on? Make sure the refrigerator control is on. See “Using the Control(s).”

New installation? Allow 24 hours following installation for the refrigerator to cool completely.

NOTE: Adjusting the temperature control(s) to coldest setting will not cool the refrigerator more quickly.

The motor seems to run too much

Your new refrigerator may run longer than your old one due to its high-efficiency compressor and fans. The unit may run even longer if the room is warm, a large food load is added, the door is opened often, or if the door has been left open.

The refrigerator seems noisy

Refrigerator noise has been reduced over the years. Due to this reduction, you may hear intermittent noises from your new refrigerator that you did not notice from your old model. Below are listed some normal sounds with explanations.

Pulsating - fans/compressor adjusting to optimize performance.

Hissing/Rattling - flow of refrigerant, movement of water lines, or from items placed on top of the refrigerator.

Popping - contraction/expansion of inside walls, especially during initial cool-down.

Water running/dripping - may be heard when ice melts during defrosting and water runs into the drain pan.

The door will not close completely

Door blocked open? Move food packages away from door.

Bin or shelf in the way? Push bin or shelf back in the correct position.

Crisper cover in the way? Make sure the crisper cover is fully pushed in, so that the back rests on the supports.

The door is difficult to open

WARNING

Explosion Hazard

Use nonflammable cleaner.

Failure to do so can result in death, explosion, or fire.

Gaskets dirty or sticky? Clean gaskets and contact surfaces with mild soap and warm water. Rinse and dry with soft cloth.

10

Image 10
Contents Refrigerator Safety Refrigerator User InstructionsUnpack the Refrigerator Installation InstructionsClean Before Using Before You Throw Away Your Old Refrigerator or FreezerElectrical Requirements LocationRequirementsRecommended Grounding Method Water Supply Requirements Connect the Water SupplyRemove Doors and Hinges all models Complete the InstallationRefrigerator Doors Reverse Doors-Standard Door optionalFinal Steps all models Reverse Doors-Contour Door optionalReplace Doors and Hinges all models DoorsOptional Using theControls Adjust the DoorsRefrigerator USE Crisper Humidity Control CleaningRefrigerator Care Ice MakerChanging the Light Bulbs TroubleshootingRefrigerator Operation Temperature and Moisture AccessoriesIceand Water This limited warranty does not cover Limited WarrantyItems Excluded from Warranty Disclaimer of Implied WarrantiesSeguridad DEL Refrigerador EL Usuario DEL RefrigeradorRequisitos de ubicación Instrucciones DE InstalaciónDesempaque el refrigerador Quite los materiales de empaqueMétodo de conexión a tierra recomendado Requisitos eléctricosRequisitos del suministro de agua Presión del aguaConexión al refrigerador Conexión del suministro de aguaConexión a la línea de agua Cómo terminar la instalaciónCarcasa Puertas del refrigeradorCómo quitar las puertas y las bisagras todos los modelos Puerta del congeladorPuerta del refrigerador Pasos finales todos los modelosPuertas Cambio del sentido De apertura de las Puertas Puerta Cierre de la puerta Ajustelas puertasUso de los controles Alineamiento de las puertasFábrica de hielo LimpiezaCómo cambiar los focos Solución DE ProblemasFuncionamiento del refrigerador Temperatura y humedad AccesoriosHielo y agua Exclusiones DE LA Garantía Whirlpool CorporationGarantía Limitada Esta garantía limitada no cubreSécurité DU Réfrigérateur RéfrigérateurDéballagedu réfrigérateur Instructions DinstallationExigences demplacement Retirer les matériaux d’emballageSpécifications del’alimentationen eau Méthode recommandée de mise à la terreSpécificationsélectriques Pression de leauRaccordement à une canalisation d’eau Achever l’installationRaccordement de la canalisation deau Raccordement au réfrigérateurCaisse Portes du réfrigérateurDémontage Portes et charnières tous les modèles Porte du compartiment de congélationPorte du réfrigérateur Réinstallation Portes et charnières tous les modèlesÉtapes finales tous les modèles PortesFacultatif Utilisation DU Réfrigérateur Utilisation des commandesAjustement desportes Nettoyage Entretien DU RéfrigérateurMachine à glaçons Mise en marche/arrêt de la machine à glaçonsDépannage Remplacement des ampoules d’éclairageFonctionnement du réfrigérateur Température et humidité Glaçons et eauGoût, odeur ou couleur grise des glaçons AccessoiresLes glaçons sont creux ou petits Nettoyant et poli pour acier inoxydableÉléments Exclus DE LA Garantie CorporationGarantie Limitée La présente garantie limitée ne couvre pasW10249203A EN/FR PN W10249202A Whirlpool Corporation All rights reserved