GETTING STARTED
To start your dishwasher, refer to the following quick reference guide.
Starting Your Dishwasher
1.Load the dishwasher (see pages
2.Fill the detergent dispenser (see page 8).
5.Turn cycle indicator knob clockwise to the cycle you want (see page 9).
6.Turn on hot water nearest the dishwasher and let run until water is hot. Turn water off.
3.Fill the rinse aid dispenser (see page 8).
7.Firmly close door to latch and start dishwasher.
4.Select desired energy option (see page 10).
Stopping Your Dishwasher
You can stop your dishwasher anytime during a cycle. Simply unlatch the door and wait for the water action to stop.
Normal Operation
The following conditions are normal and indicate proper operation.
•Motor sounds will be heard before water enters the tub.
•Short time delays occur after a cycle is selected and between washes and rinses.
•A small amount of clean water will remain in the bottom of the tub after each cycle.
LOADING YOUR DISHWASHER
It is not necessary to rinse dishes before putting them into the dishwasher. Just remove large pieces and quantities of food and bones. Empty cups and glasses. It may be necessary to presoak or lightly scour firmly
Always load dishes so soiled surfaces are reached by water spray from rotating spray arm or center wash tower. Water must be able to drain off completely for best results.
6