Whirlpool 929 warranty Starting a wash cycle, Stopping the dishwasher, Starting Your Dishwasher

STARTING YOUR DISHWASHER

Starting a wash cycle

1.Load the dishwasher. See the “Loading Your Dishwasher” section.

6.Run hot water at the sink nearest the dishwasher until water is hot.

Turn off water.

2. Spin the spray arms. They should turn

freely.

3.Add detergent. See the “Using the Dispensers” section.

4.Add rinse agent, if needed.

7.Press a Cycle pad. If desired, press one or more Option pads. The

dishwasher starts filling once you press a Cycle pad unless you select the delay wash cycle. You may press Option pads as the machine is filling.

The pad indicator glows red when a cycle or an option is selected.

5.Close door firmly until it latches.

Stopping the dishwasher

You can stop your dishwasher anytime during a cycle. All you have to do is:

•Open the door slightly. Wait for any filling or spraying action to stop before opening the door all the way. Close the door to continue the cycle.

OR

•Press Cancel/Drain. Once pressed, a 2-minute drain starts.

7