Whirlpool 2309541B warranty Water is leaking from the dispenser

Water is leaking from the dispenser

WATER FILTER CERTIFICATIONS

NOTE: One or two drops of water after dispensing is normal.

■Glass not being held under the dispenser long enough?

Hold the glass under the dispenser 2 to 3 seconds after releasing the dispenser lever.

■ New installation? Flush the water system. See “Prepare the Water System” or “Water and Ice Dispensers.”

■ Recently changed water filter? Flush the water system. See “Prepare the Water System” or “Water and Ice Dispensers.”

The dispenser water is not cool enough

NOTE: Water from the dispenser is chilled to only 50°F (10°C).

■ New installation? Allow 24 hours after installation for the water supply to cool completely.

■ Recently dispensed large amount of water? Allow 24 hours for water supply to cool completely.

■ Water not been recently dispensed? The first glass of water may not be cool. Discard the first glass of water.

■ Refrigerator connected to a cold water pipe? Make sure the refrigerator is connected to a cold water pipe. See “Water Supply Requirements.”

11