Whirlpool 2212539 manual Freezer Features, Adjustable Half-width Freezer Shelf, on some models

FREEZER FEATURES

Your model may have some or all of these features. Features that can be purchased separately as product accessories are labeled with the word “Accessory.” Not all accessories will fit all models. If you are interested in purchasing one of the accessories, please call the toll-free number on the cover or in the "Assistance or Service" section.

Freezer Shelf

(on some models)

To remove the shelf:

1.Lift entire shelf slightly.

2.Move shelf all the way to one side.

3.Tilt other side up and out of shelf supports.

4.Pull shelf up and out

To replace the shelf:

1.Tilt the shelf and insert into freezer compartment.

2.Insert one end of the shelf all the way into the center of the shelf supports.

3.Lower other end of shelf and insert into the shelf supports.

4.Lower shelf into place.

NOTE: The shelf should lower slightly and lock into place. If the shelf does not appear stable, make sure both ends of the shelf are inserted into the shelf supports.

Frozen food storage guide

Storage times will vary according to the quality and type of food, the type of packaging or wrap used (should be airtight and moisture-proof), and the storage temperature. Seal the package or container securely to prevent taste and odor transfer throughout the product. Ice crystals inside a sealed package are normal. This simply means that moisture in the food and air inside the package have condensed, creating ice crystals.

Put no more unfrozen food into the freezer than will freeze within 24 hours (no more than 2-3 lbs. of food per cubic foot [907-1,350 g per L] of freezer space). Leave enough space in the freezer for air to circulate around packages. Be careful to leave enough room for the door to close tightly.

NOTE: For more information on preparing food for freezing, check a freezer guide or reliable cookbook.

Adjustable Half-width

Freezer Shelf

(on some models)

To remove and replace the shelf:

1.Remove the shelf by lifting the shelf up and pulling straight out.

2.Replace the shelf over the supports and lower it into place.

Pull-out Freezer Floor

(on some models)

To remove and replace the freezer floor:

1.Lift both back “fences” up and out.

2.Remove the freezer floor by pulling it out about 1 in.

(25.40 mm) with one hand around the air tower section (center back) and one hand at center front.

3.Lift up floor at rear until hooks release from cabinet and pull the floor out the rest of the way.

4.Replace the freezer floor by sliding the floor straight in until the hooks drop into place at rear of cabinet.

5.Replace “fences” by aligning pins with socket in the floor, and pushing down until they snap into place.

15