SETTING THE CONTROLS
Adding an item during a cycle
You can add an additional item to the dishwasher anytime before the Cycle Control knob reaches Light Wash. Items added after the Cycle Control knob reaches Light Wash may only be rinsed.
1.Lift up the door latch to stop the cycle. Wait for spraying action to stop before opening the door.
2.Open the door and add the item.
3.Close the door, but do not latch it. Wait 30 seconds for the air in the dishwasher to warm up. Doing so reduces the amount of moisture in the vent when restarting a cycle.
4.Close the door firmly until it latches. The dishwasher resumes the cycle.
Using delay wash
You can set the dishwasher to start a cycle from 2 to 4 hours later.
1.Press the desired Cycle pad.
2.Press the desired Option pads.
3.Turn the Cycle Control knob clockwise to the number of hours (from 2 to 4 hours) you want the dishwasher to delay before the selected cycle starts.
4.Close and latch the door.
NOTES:
•You can add items while time is counting down. Close and latch the door. The Cycle Control knob will not advance if the door is unlatched.
•Rinse Only and Light Wash cycles cannot be delayed.
Punched Hole
52.50/52.0 Dia.
DU400
2
DELAY HOURS 4
15