Broan K7388 manual

Page 4

! CAUTION

1.To reduce risk of fire and to properly exhaust air, be sure to duct air outside. Do not vent exhaust air into spaces within walls or ceilings or into attics, crawl spaces, or garages.

2.Take care when using cleaning agents or detergents.

3.Avoid using food products that produce flames under the Range Hood.

4.For general ventilating use only. Do not use to exhaust hazardous or explosive mate- rials and vapors.

5.To avoid motor bearing damage and noisy and/or unbalanced impellers, keep drywall spray, construction dust, etc. off power unit.

6.Your hood motor has a thermal overload which will automatically shut off the motor if it becomes overheated. The motor will restart when it cools down. If the motor continues to shut off and restart, have the hood serviced.

7.For best capture of cooking impurities, the bottom of the hood should be a minimum of 24" and a maximum of 30" above the cooking surface.

8.Two installers are recommended because of the large size and weight of this hood.

9.This product is equipped with a thermostat which may start blower automatically. To reduce the risk of injury and to prevent power from being switched on accidentally, switch power off at service panel and lock or tag service panel.

10.Please read specification label on product for further information and requirements.

- 4 -

Image 4
Contents Model K7388 English Français EspañolPage Read and Save These Instructions Intended for Domestic Cooking only ! WarningPage Prepare the Hood Install the Ductwork WiringInstall Flue Mounting Bracket Install Mounting BracketDucted and NON-DUCTED Ducted Configuration NON Ducted Configuration NON Ducted CONFIGURATION, cont’d InstallHood NON-DUCTED Recirculation Filter Installation MaintenanceHood Cleaning Grease FiltersControls OperationHeat Sentry Fuse Replacement WarrantySwitch OFF the Electricity Supply Halogen BulbsSeulement Pour Utilisation Domestique ! Avertissements AvertissementsPage Preparez LA Hotte Installation Electrique Installation DU Systeme’EVACUATION Installation DU Support DE Fixation DU Carneau Installation Etrier D’ASSEMBLAGECaréné ET NON Caréné Configuration Carénée Préparation DE LA HotteConfiguration NON Carénée Préparation DE LA Hotte Configuration NON Carénée suiteDE LA Hotte Entretien Assemblage DU Filtre PourNettoyage de votre hotte Commandes FonctionnementHeat Sentrymc AvertissementRemplacement Fusible Ampoules HalogenesGarantie ’AMPOULE Peut Etre ChaudeLEA Y Conserve Estas Instrucciones AdvertenciaAdvertencia Prepare LA Campana Instalacion DEL Tubo DE Extraccion Instalacion ElectricaInstalacion Soporte Para EL Montaje CON Conducto Y SIN ConductoConfiguración CON Conducto Preparación DE LA CampanaConfiguración SIN Conducto Monte el pleno de recirculación al conducto flexible. FigInstalación DE Configuración SIN CONDUCTO, continuaciónLA Campana Filtro al carbón configuración sin tubo Instalacion DEL FiltroMantenimiento Filtros antigrasaFuncionamiento MandosHeat Sentrymr AvertenciaLamparas Halogenas Sustitucion FusibleGarantia Atención LAS Lámparas Pueden Estar CalientesModel K7388 Heat Sentry Service PartsKeyno Description Modele K7388 Heat Sentry Liste Pieces DE RechangePart N Description Modelo K7388 Heat Sentry Lista DE Piezas DE RecambioCÓD. N Pieza N Descripción Model K7388 Heat Sentry 04307117/3