Bakers Pride Oven LGF-FC service manual Comments Step Action Display

Gas Pressure Fryer			Operation
	Table 2. Product Programming Procedure
			COMMENTS
STEP	ACTION	DISPLAY
1	Press the FILTER/OFF/FRY	LOW
	switch to FRY.
2	Press PROG on the keypad.	PROGRAM CODE
3	Input 1724 and press ENTER.	PROGRAM PRODUCT #
4	Select the program product	PROGRAM PRODUCT X	X refers to the program number
	number (1-8).		you selected.
5	Press ENTER.	PROGRAM TIME1	This command allows you to
		00:00	specify the cooking time for this
			stage. The time displayed may be
			a previously programmed value.
6	Press TOGGLE/CLEAR and	PROGRAM TIME1	XX:XX refers to the number of
	input the number of minutes you	XX:XX	minutes you input.
	want to cook.
7	Press ENTER.	PROGRAM TEMP1	This command allows you to
		000 °F	specify the cooking temperature for
			this stage. The temperature
			displayed may be a previously
			programmed temperature. The
			temperature scale may also display
			°C depending on the system option
			that is set.
8	Press TOGGLE/CLEAR and	PROGRAM TEMP1	XXX refers to the cooking
	input the cooking temperature for	XXX °F	temperature you input.
	product to be cooked.
9	Press ENTER.	PROGRAM TEMPCOM1	This command enables you to
		FLEX TIME	select whether or not time is
			allowed for the fryer to recover
			from temperature loss while
			cooking during this stage. The
			FLEX TIME option will allow the
			fryer to recover from temperature
			loss.
10	Press TOGGLE/CLEAR until the	PROGRAM TEMPCOM1	X refers to the temperature
	desired option is displayed.	X	compensation option selected.
11	Press ENTER.	PROGRAM VALVE1	This command allows you to
		CLOSED	specify whether the solenoid valve
			will be open or closed during this
			stage.
12	Press TOGGLE/CLEAR until the	PROGRAM VALVE1	X refers to the solenoid valve
	desired option is displayed.	X	option selected. OPEN is used for
			Models ALF and BLF Automatic
			Lift fryers. If your program requires
			the solenoid valve to be closed
			while cooking, choose the
			CLOSED option.

21